Description
Window Switch PEUGEOT 307
Product Overview
This genuine-style power window switch is designed for the Peugeot 307 and provides reliable control of the vehicle’s electric windows. Ideal for professional mechanics and experienced DIYers, the switch is commonly searched by product code and fits door control panels on driver and passenger sides depending on vehicle configuration. Perfect for replacing a faulty or intermittent switch to restore smooth window operation.
Technical Information
- Manufacturer: Stellantis (Peugeot/Citroën)
- Model: Peugeot 307
- Product Codes: 96351625XT, 6351625XT
- Additional Numbers: 6554E7
Function And Fitment
The switch controls the power window motor(s) via the door wiring harness, sending up/down commands and, where applicable, handling safety features such as anti-pinch/auto-stop. It is intended as a direct replacement for faulty window control switches on compatible Peugeot 307 models and matches OEM form, fit and basic function for vehicles using the listed part numbers.
How To Replace (Basic Guide)
- Park the vehicle on a flat surface, engage the handbrake and remove the ignition key.
- Disconnect the negative battery terminal to avoid short circuits while working on electrical components.
- Remove the door trim/panel: carefully release retaining clips and screws to access the switch housing.
- Unscrew or unclip the switch module from the door trim, then unplug the electrical connector.
- Fit the new switch, reconnect the connector and reassemble the door trim. Reconnect the battery and test all window functions before finishing assembly.
Installation Recommendations
- Use trim tools to avoid damaging clips and panels.
- Inspect the wiring harness and connector for corrosion or damage; clean contacts if necessary and apply a small amount of dielectric grease to protect against moisture.
- After installation, cycle the windows to ensure smooth operation and verify any auto-functions (if equipped).
- If the switch still does not operate, check fuses, window motor/regulator and door wiring for faults before replacing again.
Why This Part Fails
Common failure causes include wear of internal electrical contacts from frequent use, contamination or water ingress from a damaged door seal, mechanical breakage of plastic actuators, and corrosion of connector pins. Intermittent operation is a typical early symptom as contacts begin to degrade.
Typical Symptoms
- Window does not respond to switch commands.
- Intermittent or erratic window movement.
- Only one direction (up or down) works.
- Switch feels loose, sticks, or has broken buttons.
Notes For Professionals And DIYers
Part numbers are often used to search for the correct replacement; verify the code on your original switch against the Product Codes and Additional Numbers listed above. This switch is suitable for direct replacement in compatible Peugeot 307 models and is a practical, cost-effective repair for restoring window functionality.
