Description
Complete instrument cluster for Citroën Berlingo II and Peugeot Partner II from a vehicle with 151,000 km mileage.
This is a used complete instrument cluster / tachometer assembly removed from a Citroën Berlingo II / Peugeot Partner II (vehicle mileage 151,000 km). The unit is frequently searched for by its part numbers, so you will also find it listed under codes such as 9662745180 and 6105V8. Ideal for mechanics and DIY enthusiasts looking for a direct replacement part for these models.
Product Overview
The instrument cluster is the central driver information module: it displays vehicle speed, engine RPM (tachometer), fuel level, coolant temperature, odometer/trip readings and warning indicators (airbag, ABS, engine management, etc.). The assembly typically contains the gauge stepper motors or needles, illumination, printed circuit board with microcontroller and memory that stores configuration and odometer data. Replacing the cluster restores clear instrumentation and warning lamp functionality when the original unit is faulty or damaged.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën Berlingo II / Peugeot Partner II
- Product Codes: 9662745180, 6105V8
- Other Numbers: 6105V7, 6924K1, 6105X3, 6105X4
- Mileage On Unit: 151,000 km
- Condition: Used, complete assembly
Installation Recommendations
- Disconnect the battery before starting work to avoid short circuits and prevent damage to the cluster electronics.
- Remove surrounding dashboard trim panels carefully to access the cluster mounting screws—use trim tools to avoid damaging clips and panels.
- Unscrew the cluster fasteners, tilt the assembly forward and disconnect the multi-pin electrical connectors and any illumination or sensor plugs.
- Fit the replacement unit, reconnect all plugs securely and refit screws and trim in reverse order.
- After installation, check all gauges and warning lights. Some vehicles may require coding, adaptation or mileage cloning to match vehicle settings and to restore full functionality; if coding is needed, perform it with appropriate PSA diagnostic equipment.
Most Common Failure Reasons
- Wear Of Gauge Motors/Steppers: Needles can stick or show incorrect readings as stepper motors age.
- Backlight Or Illumination Failures: Burnt LEDs or poor solder joints cause partial or complete loss of lighting.
- Electronic Component Degradation: Failed capacitors, solder cracks or damaged traces on the PCB due to vibration or thermal cycling.
- Connector Or Wiring Damage: Corrosion or broken pins at the harness connector lead to intermittent signals or total loss of display.
- Water Ingress Or Mechanical Damage: Moisture or impact can permanently damage internal components.
Notes
Many customers search for this part by the product codes shown above. Compatibility is primarily with Citroën Berlingo II and Peugeot Partner II models using the listed part numbers. Replacement clusters may require programming or cloning to preserve odometer and vehicle settings—plan for diagnostic time if required.
