Description
Steering column stalk controls VALEO COM2003 for Citroën C5 II and PEUGEOT 407 with ESP. Controls fog lights, trip computer, without rear wiper, rain sensor, ESP. Used part, the turn signal stalk may be slightly loose but does not skip. Fully functional.
High-quality replacement steering column stalk assembly designed for mechanics and experienced DIYers working on Citroën C5 II and Peugeot 407 vehicles equipped with ESP. This Valeo COM2003 unit operates fog lights, the trip computer, rain sensor input and ESP-related signals; it is intended for cars without a rear wiper. Frequently searched by product numbers (e.g. 96611305XT), this used but fully working control module is a cost-effective solution when the original stalks show wear or intermittent contacts.
Technical Information
- Manufacturer: Valeo
- Model: Citroën C5 II; Peugeot 407
- Product Codes: 96611305XT, 6242T0, 6242Z6, 6242S6
- Other Numbers: VALEO COM2003
Compatibility / Applications
Compatible with Citroën C5 II and Peugeot 407 models equipped with ESP and intended for versions without a rear wiper. Ideal for vehicles that use the Valeo COM2003 stalk assembly and match the listed product codes. Buyers often search by the OEM code 96611305XT when looking for this part.
Function
This stalk assembly controls multiple functions from the steering column: turn signals, fog lights, trip computer inputs, rain sensor interface and ESP-related switching. It does not include controls for a rear wiper on the specified configuration.
Replacement Procedure
- Disconnect the negative battery terminal and wait at least 10 minutes to reduce the risk of accidental airbag deployment.
- Remove steering wheel trim and airbag module following manufacturer procedures (mark steering wheel position before removal).
- Remove upper and lower steering column covers to access the stalk assembly.
- Unplug electrical connectors and release retaining screws or clips holding the stalk to the column.
- Fit the replacement stalk, connect wiring, secure fasteners and reassemble covers and airbag in reverse order.
- Reattach the battery, verify all functions (indicators, fog lights, trip computer inputs, rain sensor/ESP signals) and clear any stored fault codes if present.
Installation Recommendations
- Always follow vehicle manufacturer instructions for airbag handling and steering wheel removal; if unsure, have the work performed by a professional.
- Check connector pins for corrosion or damage and clean contacts before installation. Apply a small amount of dielectric grease if appropriate to prevent future corrosion.
- Align the steering wheel properly when reinstalling to avoid steering-angle sensor calibration issues.
- After installation, inspect electrical operation and reset/clear faults using a diagnostic tool if needed.
Most Common Failure Causes
- Mechanical wear of internal pivots and plastic detents leading to loose or imprecise stalk feel.
- Worn microswitches or contact surfaces causing intermittent operation of indicators or other functions.
- Moisture ingress and corrosion of electrical contacts producing unreliable signals.
- Broken mounting tabs or mechanical damage from misuse or impact.
Condition Note
Used part. As stated above, the turn signal stalk may be slightly loose in feel but does not skip or fail in operation. The unit is described as fully functional.
If you are a professional mechanic or a competent DIYer, this Valeo COM2003 steering column stalk is a practical replacement option that restores full control functions on compatible Citroën C5 II and Peugeot 407 vehicles.
