Air Filter Box Cover 1.4 VTI 1.6 VTI Citroën Peugeot V753482480 1420T5

Description

Airbox Cover for 1.4 VTi and 1.6 VTi for Peugeot and Citroën vehicles. We also have the complete airbox under 1420R2.

This Airbox Cover (Air Filter Box Lid) is a direct-fit replacement designed for petrol 1.4 VTi and 1.6 VTi engines used in a range of Peugeot and Citroën models. Manufactured to the original OE shape and dimensions, it secures the air filter element, maintains the intake sealing surface and helps prevent unmetered air or water ingress. The part is commonly searched by product code (V753482480 / 1420T5), so listing the number makes it easy for technicians and DIY enthusiasts to find the correct item quickly.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: 1.4 VTi, 1.6 VTi (Examples Of Compatible Vehicles: Citroën C4 II; Peugeot 207; Peugeot 308)
• Product Codes: V753482480, 1420T5
• Other Numbers: 1420R2 (Complete Airbox)

Compatibility

Fits multiple Peugeot and Citroën petrol applications with 1.4 VTi and 1.6 VTi engines. Typical compatible models include Citroën C4 II and Peugeot 207 and 308, among others using the same intake layout. Always check the part number when ordering — technicians often search by V753482480 or 1420T5 to ensure a direct match.

Function And Benefits

• Secures The Air Filter Element And Maintains Proper Sealing To Prevent Unmetered Air Intake.
• Protects The Air Filter From Dirt, Moisture And Engine Bay Debris.
• Helps Preserve Engine Performance And Fuel Economy By Ensuring Stable Airflow.
• OE-Style Fitment Reduces Installation Time And Ensures Correct Positioning Of Intake Ducts.

Typical Replacement Procedure

1. Park Vehicle On Level Ground And Allow Engine To Cool.
2. Release Any Fasteners Or Clips Securing The Airbox Cover (Bolts, Screws Or Plastic Clips Depending On Model).
3. Disconnect Any Attached Intake Ducts Or Sensors If Required (Handle Mass Air Flow Or Intake Temperature Sensors With Care).
4. Lift Off The Cover, Inspect The Air Filter And Replace If Dirty Or Damaged.
5. Fit The New Cover, Ensure The Sealing Gasket Or Lip Is Correctly Seated And Reinstall Fasteners Evenly Until Secure.
6. Reconnect Ducts Or Sensors And Verify There Are No Air Leaks Around The Seal.

Installation Recommendations

• Perform Work With The Engine Cold. Wear Gloves To Protect Hands From Sharp Edges.
• Inspect Clips, Fasteners And The Rubber Seal When Removing The Old Cover; Replace Damaged Clips To Ensure Proper Retention.
• Clean The Airbox Lower Section Before Installing The New Cover To Remove Accumulated Debris And Oil Residues.
• Handle Any Intake Sensors Carefully; Do Not Force Connectors Or Overtighten Fasteners.
• After Installation, Start The Engine And Listen For Unusual Intake Noises; Check For Check-Engine Light Related To Airflow If Present.

Reason Why The Part Most Commonly Fails

The Most Common Cause Of Damage Is Mechanical Wear Or Breakage Of Plastic Clips And Mounting Tabs, Often Occurring During Routine Filter Changes Or After Minor Impacts. Heat Cycling And Engine-Bay Vibration Can Cause Cracks Or Warping Over Time, Leading To Poor Sealing, Unmetered Air Ingress And Potential Driveability Issues. Water Ingress From High-Pressure Washing Or Driving Through Deep Water Can Also Damage The Airbox Assembly If The Seal Is Compromised.

Notes For Technicians And DIYers

Because This Part Is Frequently Searched By Its Product Code (V753482480 / 1420T5), Include The Code When Ordering To Reduce The Risk Of Mismatches. Consider Replacing Any Worn Clips Or The Air Filter Simultaneously To Ensure A Long-Lasting Repair. Proper Fitment Restores Correct Airflow Behavior And Helps Prevent Erratic Idle, Loss Of Power, Or Diagnosis Errors Related To Intake Leaks.