Description
Speedometer instrument cluster for Peugeot 206 1.4 HDi. Mileage: 176,000 km.
Description
High-quality used instrument cluster (speedometer) suitable for Peugeot 206 1.4 HDi. Ideal for professional workshops and experienced DIY mechanics searching by part number 9648836380 or code 6104TX. The unit displays vehicle speed, total mileage and includes the standard warning and indicator lamps expected in the 206 dash. Replacing a faulty cluster restores accurate mileage readout and dashboard indications, improving safety and vehicle diagnostics.
Technical Information
- Manufacturer: Peugeot (Stellantis)
- Model: Peugeot 206 1.4 HDi
- Product Codes: 9648836380, 6104TX
- Additional Numbers: NFP
- Mileage On Unit: 176,000 km
Function
The instrument cluster Provides Primary Driver Information Such As Vehicle Speed, Odometer (Total Mileage), Trip Meter And Standard Warning Lights (Engine, Oil, Battery, ABS, Airbag, Etc.). Backlighting And Indicator Symbols Allow Clear Readout Under Various Lighting Conditions.
Replacement Procedure
Basic Steps For Replacement (Recommended For Experienced Technicians/DIY With Basic Tools):
- Disconnect The Battery Before Starting To Avoid Short Circuits And Potential Damage To Electronic Components.
- Remove Dashboard Trim Surrounding The Cluster Carefully To Avoid Breaking Clips.
- Unscrew The Fastening Screws Holding The Cluster In Place.
- Pull The Cluster Forward Gently And Disconnect The Multi-Pin Connector(s) By Releasing The Retaining Clip.
- Install The Replacement Unit, Reconnect The Connector(s), Screw The Cluster Back In Place And Refit The Trim.
- Reconnect The Battery And Verify All Indicators, Lights And Odometer Readout Function Correctly. Reset Clock And Trip As Required.
Installation Recommendations
- Always Disconnect The Battery Before Removal Or Installation To Protect The Unit And Vehicle Electronics.
- Handle The Cluster By Its Housing; Avoid Touching Circuit Boards Or Pins.
- Inspect Connectors For Corrosion Or Bent Pins And Clean Contacts If Necessary.
- After Installation, Verify All Dashboard Lights And Gauges Work Properly. Check For Fault Codes That May Relate To The Cluster.
Most Common Failure Causes
Instrument Clusters On Older Peugeot 206 Models Typically Fail Due To:
- Worn Or Sticking Stepper Motors Affecting Needle Movement.
- Cracked Or Cold Solder Joints On The Printed Circuit Board Causing Intermittent Failures.
- Moisture Ingress Or Corrosion At Connectors Leading To Poor Electrical Contact.
- Failed Backlight Or Bulbs/LEDs Resulting In Poor Visibility.
- Physical Damage From Impact Or Improper Removal/Installation.
Why Choose This Unit
This cluster Is A Direct Fit For Mechanics And Knowledgeable DIYers Who Search By Part Number (9648836380 / 6104TX). Provided Mileage Is Listed To Help Assess Remaining Service Life. Replacing A Faulty Cluster With A Matching Unit Restores Reliable Dashboard Information Quickly And Cost-Effectively.
Notes
Unit Comes With Specified Mileage Shown. After Installation, Check All Functions And Instrument Lighting. If Additional Electronic Symptoms Persist, Inspect Vehicle Wiring And Related Sensors.
