Description
Right rear door handle for Citroën Xsara, color black.
This Used right rear exterior door handle is a direct-fit replacement for Citroën Xsara models. Supplied with common part numbers 96334566, 96334570 and 9101N1, it is an economical solution for workshops and DIY enthusiasts looking to restore proper door operation and appearance. The handle is finished in black and designed to mate with the original locking and linkage components of the rear right door.
Key Features
– Direct fit for Citroën Xsara rear right door.
– Commonly searched by part numbers: 96334566, 96334570, 9101N1 — handy for quick lookup.
– Black exterior finish to match factory trim.
– Suitable for mechanics and competent DIY installers who remove door trim and handle linkage.
Compatibility
Fits Citroën Xsara (rear right / passenger side depending on market). Verify fitment by comparing part numbers 96334566 / 96334570 / 9101N1 with the part being replaced. This handle is typically compatible with factory door latch and linkage arrangements used on Xsara models.
Technical Information
- Manufacturer: Stellantis (Citroën)
- Model: Citroën Xsara
- Product Codes: 96334566, 96334570, 9101N1
- Other Numbers: 96334570, 9101N1
Installation Recommendations
1. Prepare tools: trim removal tools, Torx/Phillips screwdrivers, socket set, pliers.
2. Work on a clean, stable surface and keep fasteners organized.
3. Remove the interior door panel carefully to avoid breaking plastic clips—start at the bottom and use a trim tool.
4. Detach the inner door handle rods or cables from the latch and handle (note their orientation for reassembly).
5. Unscrew or unclip the old exterior handle from the door shell and remove it.
6. Fit the replacement handle, reconnect linkage, and verify smooth mechanical operation before reassembling the door panel.
7. Replace any damaged trim clips or worn linkages to ensure long-term reliability.
Recommendation: Lubricate moving linkages and check the latch operation after installation. If the lock cylinder is integrated and damaged, inspect or replace the cylinder as required. For corrosion-prone vehicles, treat mounting points to prevent future seizing.
Why The Part Most Often Fails
Exterior door handles on older Xsara models typically fail due to plastic fatigue, internal lever breakage, or damage from impacts. Common causes include repeated mechanical stress, brittle plastic components after years of exposure to UV and temperature cycles, corrosion around mounting points or pivot pins, and snapped or detached linkage rods. In many cases the handle housing remains intact while the internal plastic lever or clip breaks, resulting in a handle that moves but does not operate the latch.
Notes For Mechanics And DIYers
– This is a used part; examine all fastening points and linkage clips during installation and replace any worn components.
– Keep part numbers 96334566 / 96334570 / 9101N1 handy when searching catalogs or ordering replacement clips and rods.
– After installation, confirm correct door locking/unlocking from both inside and outside and ensure the door closes securely.
Additional Advice
Replacing the exterior handle together with any damaged clips or linkage improves service life and reduces the chance of rework. Where paint finish is important, inspect the surrounding door paint and consider touch-up to prevent corrosion at the handle mounting area.
