Description
Speedometer For PEUGEOT 307 And 307 CC With 2.0 16V Engine. From A Vehicle With Mileage 149,000 Km.
Product Overview
High-quality used instrument cluster (speedometer) suitable for Peugeot 307 models equipped with the 2.0 16V petrol engine, including 307 CC. Ideal For Professional Workshops And DIY Mechanics Looking For A Direct Replacement To Restore Dash Functionality. Commonly Searched By Part Numbers, Which Are Listed Below To Help Fast Identification.
Key Benefits
- Direct Fit For Peugeot 307 (Including 307 CC) With 2.0 16V Engine.
- Odometer Reading: 149,000 Km — Useful For Mileage Reference And Verification During Installation.
- Contains Original Manufacturer References To Speed Up Parts Lookup (See Technical Information).
- Restores Speed Indication, Odometer, And Instrument Panel Alerts When Replaced Correctly.
Function And Common Faults
The Instrument Cluster Displays Vehicle Speed, Odometer/Trip Information, Warning Lights, And Other Instrumentation Data. Typical Failures On Peugeot 307 Clusters Include Faulty Stepper Motors (Needles Not Moving Or Jumping), Dim Or Dead Backlight, Intermittent Digital Display Or Odometer Errors, And Moisture-Related Corrosion On Connectors Or Circuitry. These Faults Usually Develop Gradually With Age, Electrical Stress, Or Water Ingress.
Replacement Procedure (Basic Guide)
- Disconnect Battery Before Starting Work To Prevent Short Circuits And Protect Electronic Modules.
- Remove Dashboard Trim Panels Around The Cluster Carefully To Avoid Breaking Clips.
- Unscrew The Fixing Screws Holding The Cluster In Place And Tilt The Cluster Forward.
- Unplug The Electrical Connectors And Any Illumination Or Sensor Plugs. Inspect Connectors For Corrosion Or Bent Pins.
- Fit The Replacement Unit, Reconnect The Electrical Plugs, Secure The Cluster, Refit Trim, And Reconnect The Battery.
- Verify All Functions: Speed Indication, Odometer/Trip, Illumination, And Warning Lights. If Necessary, Perform Coding/Adaptation (See Notes Below).
Installation Recommendations
Perform Installation In A Dry, Clean Work Area. Always Disconnect The Battery Before Removing The Cluster. Handle The Unit By The Housing To Avoid Contact With Circuitry. Inspect Connector Pins And Wiring For Damage Before Reinstallation. If The Replacement Cluster Has A Different Hardware Or Software Reference, Professional Coding Or Adaptation May Be Required To Ensure Full Compatibility With Immobilizer, Dashboard Menus, And Service Indicators.
When Coding Or Adaptation Is Needed
Some Instrument Clusters May Require Coding Or Adaptation After Installation To Synchronize With Vehicle Electronics (Immobilizer, Mileage Settings, Or Vehicle Options). Where Coding Is Required, Use A PSA-Compatible Diagnostic Tool (DiagBox/Lexia/PP2000) Or Ask A Qualified Technician To Perform The Procedure. If No Coding Is Required And The Unit Matches The Original Reference, The Cluster Can Often Become Operational After Plug-In.
Why This Part Fails Most Often
Primary Causes Of Failure Are Age-Related Wear Of Stepper Motors, Degraded Backlight LEDs Or Lamps, Moisture Ingress Leading To Corrosion, And Thermal Stress On Electronic Components. Electrical Surges Or Poor Battery/Charging System Condition Can Accelerate Failures. Regular Inspection Of The Dashboard Seal Areas And Avoiding Direct Water Exposure Helps Reduce Risk.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 307, Including 307 CC — 2.0 16V
- Product Codes: 9655476680; P9655476680
- Additional Numbers: 6103F4; 6106J1; G 00; NFP
- Condition: Used Part From Vehicle With 149,000 Km
Compatibility And Identification
Search By The Provided Part Numbers To Confirm Fitment Quickly. The Cluster Is Typical For Early And Later 307 Variants When Matched With The Same Engine And Instrument Pack. Double-Check The Physical Connector Layout And Fixture Points Against The Vehicle Unit Before Final Installation.
Who Should Install
Recommended For Experienced Mechanics And Enthusiast DIYers Comfortable With Dashboard Disassembly. If Coding Or Immobilizer Adaptation Is Required, Use A Technician Equipped With PSA Diagnostic Tools (DiagBox/Lexia) To Ensure Correct Configuration And Full Functionality.
Additional Notes
Part Numbers And Compatibility Information Included Above Are Based On The Unit Labels And Seller Data. Please Use These References During Parts Lookup To Improve Search Visibility And Ensure You Order The Correct Replacement.
