Description
Speedometer for Citroën C1 and Peugeot 107. Removed from a vehicle with approximately 128,000 km.
This instrument cluster (speedometer) is a direct-fit unit for first‑generation Citroën C1 and Peugeot 107 models. Ideal for professional workshops and competent DIY mechanics searching by part number: 83800-0H012-A, 6105F9, 6103CF, 6103AT. The cluster displays vehicle speed, odometer and essential warning indicators; the supplied unit shows an approximate mileage of 128,000 km. If your dashboard shows erratic speed readings, non-working indicators or a blank display, replacing the cluster with a compatible unit like this one is a common and effective repair.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C1, Peugeot 107 (First generation)
- Product Codes: 83800-0H012-A
- Other Numbers: 6105F9, 6103CF, 6103AT
- Mileage On Unit: Approximately 128,000 km
Compatibility
Fits first‑generation Citroën C1 and Peugeot 107 models (commonly 2005–2014 production years). Always compare product codes listed above with the unit you are replacing to ensure compatibility.
Function
The instrument cluster provides vehicle speed readout, trip and total odometer information and houses warning lamps (engine, ABS, airbag, etc.). It supplies visual feedback needed for safe operation and communicates status to the driver via the dashboard display.
Replacement Procedure (Overview)
- Disconnect the negative battery terminal before starting to avoid electrical damage.
- Remove the dashboard trim surrounding the instrument cluster—this usually involves unclipping the bezel and removing a few screws.
- Unscrew the cluster retaining screws and carefully pull the unit forward to access electrical connectors.
- Disconnect the multi‑pin connector(s) and remove the old cluster.
- Fit the replacement unit, reconnect connector(s), secure the cluster and reassemble the trim.
- Reconnect the battery and verify operation: ignition on, check speedometer illumination, warning lights and odometer display.
Installation Recommendations
- Work should be performed with care by a trained mechanic or an experienced DIYer with basic electrical knowledge.
- Always disconnect the battery prior to removal and follow manufacturer torque and assembly instructions for dashboard components.
- Inspect connectors and wiring for corrosion or damage before installing the new unit—poor connections are a frequent cause of recurring faults.
- After installation, confirm all warning lights, illumination and gauge functions operate correctly; check fuses if any circuits remain dead.
Why This Part Commonly Fails
- Electrical Issues: Voltage spikes or poor grounding can damage internal electronics or display components.
- Wear And Tear: Mechanical stepper motors (in analog gauges) or internal components can degrade over many kilometers.
- Moisture Ingress: Water or condensation reaching the cluster can corrode contacts or damage PCBs.
- Connector Corrosion: Loose or corroded connectors cause intermittent operation or total failure.
Search tip for faster finding: include the part codes (83800-0H012-A, 6105F9, 6103CF, 6103AT) or model name (Citroën C1 / Peugeot 107) when looking for compatible instrument clusters.
