Side ceiling airbag left Peugeot 3008 5008 9801663080

Description

Left side ceiling airbag for PEUGEOT 3008 and 5008 cars of the first generation
Driver side

Part description

This used left side ceiling airbag is intended for Peugeot 3008 I and Peugeot 5008 I cars. It is an important safety element of the interior, which is also often searched for by the original number 9801663080. Thanks to the correct marking of the part, it is suitable for accurate tracing when repairing a damaged or activated airbag system.

The part is intended for the driver’s side. For auto mechanics and home repairers, it is especially important to compare the product number, the design of the connectors and the overall physical condition of the part before assembly.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 3008 I, Peugeot 5008 I
• Other numbers: 9801663080

Product codes

• Product codes: 9801663080
• Models: PEUGEOT 3008 I, PEUGEOT 5008 I

Installation recommendations

Warning: this is a safety part. Maximum care must be taken during assembly. The exact work procedure may vary according to the specific design of the car, so below we provide a general procedure typical for this type of part.

1) Before assembly

• Check if product number 9801663080 matches.
• Compare the used part with the old one by shape, fit, length and design.
• Check whether the airbag is mechanically damaged, deformed, dirty or with traces of improper handling.
• Check connectors and wiring for damage, looseness, or corrosion.
• Before any work, disconnect the battery and leave a sufficient time gap before handling the airbag system.

2) Necessary tools and materials

• basic set of hand tools
• plastic pry bar for removing interior trim
• protective gloves
• clean workspace for safe storage of the part
• optional connector cleaner and lint-free cloth

3) Step-by-step assembly procedure

1. Park the vehicle in a safe place, turn off the ignition and disconnect the battery.
2. Wait a reasonable amount of time to safely work on the passive safety system.
3. Remove the necessary parts of the interior trim so that the original side ceiling airbag can be accessed.
4. Carefully disconnect the electrical connector of the original part without using excessive force.
5. Unfasten the old airbag and remove the part safely.
6. Compare the old and new part, including fit, shape and connectors.
7. Place the used airbag in the correct place without twisting, straining or forcing it into place.
8. Fix the part using the original mounting method and check its stable position.
9. Connect the electrical connector and verify that it clicks properly.
10. Reassemble the dismantled interior parts in the original order.
11. Reconnect the battery.
12. After the assembly is complete, check whether the airbag system fault indication remains on the instrument panel.
• 4) Post-assembly checks and test drive/function verification
  • Check the correct seating of all removed plastics and trim.
  • Check that the airbag connector is secure and the wiring is not pinched anywhere.
  • After switching on the ignition, watch the airbag system lights.
  • If diagnostics are available, perform a system check and possible deletion of stored faults according to the actual condition of the vehicle.
  • During normal operation, monitor for a new error message or warning.

  5) The most common assembly mistakes + how to avoid them

  • Not disconnecting the battery before working – always start by disconnecting the power safely.
  • Exchanging a part with a different version – carefully compare the part number and design before assembly.
  • Damage to the connector or wiring – disconnect the connectors gently and without prying with metal tools.
  • Incorrect seating of the part – the airbag must sit exactly and without tension.
  • Mounting a mechanically damaged piece – always perform a thorough visual inspection before installation.

  Reasons why the part is damaged

  • Activation in the event of an accident – the most common reason for replacing a ceiling airbag.
  • Damage when disassembling the interior – careless handling can damage the package, connector and attachment.
  • Moisture and contact corrosion – long-term exposure to moisture can deteriorate electrical connections.
  • Damage to the wiring – pinching or stretching wires can cause system errors.
  • Incorrect previous repair – unprofessional intervention in the interior or electrical installation can affect the functionality of the part.