Description
Air intake pipe – turbo intake for CITROEN PEUGEOT 2.0 HDI RH02 engines
Original air connection / turbo intake pipe for Citroën Peugeot 2.0 HDi RH02 engines. This is a used OE part from disassembly, an ideal replacement for a cracked or leaking intake hose. Thanks to the original design, it fits exactly, maintains the tightness of the intake and helps to restore the correct performance and consumption of the engine.
Key OE numbers (search codes)
– PSA: 1434.E6 (1434E6)
– Production/service: 9685498280
– PSA availability status: NFP (new part no longer produced)
Compatibility
– Engine: 2.0 HDi RH02
– Makes/models: selected Citroën and Peugeot cars with this engine
– Certified to fit e.g.: Peugeot 3008 I, Peugeot 5008 I (according to product labels)
Tip: Always compare the OE numbers and shape of the part with your original part or verify by VIN.
What is the part for?
– Leads the intake air from the filter (or through the MAF sensor) to the turbocharger inlet.
– Ensures intake tightness, minimizes false air and pressure drop, protects turbo and air flow measurement.
Typical symptoms of a faulty intake connection
– Hissing, cracks, grease around joints, loose clips.
– Loss of performance, worse acceleration, higher consumption, emergency mode.
– Intake/MAF/Turbo related diagnostic errors (eg P0101, P0299).
Technical information
– Location: intake line between airbox/MAF and turbo inlet (in front of turbo).
– Design: original plastic/rubber with molded grommets for precise fit.
– Connection: quick coupling/sleeves (depending on the specific version), sealing with O-rings.
– Note: structurally corresponds to the factory part – no modifications required.
Condition and origin
– Used original PSA (OE) part, dismantled from a fully functional car.
– Normal cosmetic traces of use possible; functional unit. Always compare the condition with the photos.
– The new part is from the manufacturer NFP – the original from secondary production is thus the safest choice.
Installation recommendations
– Before assembly, check all mating surfaces and replace O-rings/gaskets if worn.
– Carefully seat and tighten the clips, avoid twisting the hoses.
– After installation, carry out a leak test (smoke test/diagnosis of MAF adaptations).
– Consider checking the condition of the filter, MAF and crankcase ventilation.
Why choose this part?
– 100% compatibility and geometry thanks to OE origin.
– Quick and cost-effective repair compared to universal replacements.
– Solves intake leaks, restores proper turbo operation and stable mixture.
Search Keywords (SEO)
air connection 2.0 HDi, turbo intake pipe, turbo intake hose, intake manifold Citroën Peugeot, 1434E6, 9685498280, RH02, turbo hose 2.0 HDi
Note: Always confirm compatibility by OE numbers and VIN. If you are not sure, write to us – we will advise on verification.
