Description
Window regulator mechanism for the right front window for Peugeot 307 CC. Passenger side.
Product Overview
Premium replacement window regulator mechanism designed for the front passenger (right) door of the Peugeot 307 CC. Ideal for professional garages and DIY mechanics, this unit restores smooth, quiet window travel and reliable operation. Commonly searched by part numbers 9656221480 and 9222V9 — include these codes in your search to find the exact match for your vehicle.
Technical Information
- Manufacturer: Stellantis / Citroën Peugeot
- Model: Peugeot 307 CC (Front Passenger Side)
- Product Codes: 9656221480, 9222V9
- Other Numbers: 1619991980, NFP
Function And What It Does
The window regulator mechanism converts motor rotation into vertical movement of the glass, guiding the window up and down inside the door. It maintains glass alignment, absorbs lateral forces, and ensures the window seals correctly against the door frame to reduce wind noise and water ingress.
Typical Causes Of Failure
- Wear Of Cables Or Plastic Rollers: Repeated cycles cause cable fraying or degradation of plastic guides and rollers, leading to jerky or stalled movement.
- Motor Wear Or Electrical Issues: The motor can weaken or fail over time due to age, heat, or intermittent electrical supply.
- Corrosion And Water Ingress: Moisture inside the door accelerates corrosion on metal parts and degrades lubricants, increasing friction and wear.
- Physical Damage Or Misalignment: Impact to the door or improper previous repairs can bend tracks or put extra stress on the regulator.
Estimated Lifetime
Lifetime varies with use and environment. In everyday conditions the mechanism commonly lasts several years; high-use vehicles or those exposed to moisture and salt may require replacement sooner. Inspect during door repairs or when window movement becomes slow, noisy, or uneven.
Installation Recommendations
Recommended For Professional Or Experienced DIY Installation. Check the part numbers match your application before starting.
- Tools Required: Socket and ratchet set, Torx bits, trim removal tools, flat and Phillips screwdrivers, masking tape or suction device to secure glass, gloves and eye protection.
- Preparation: Park on level ground and work with ignition off. It is good practice to isolate the circuit to avoid accidental operation while working on the door.
- Step-by-Step:
- Remove Door Trim: Carefully pry off trim panels and remove screws/clips. Keep fasteners organized.
- Remove Moisture Barrier: Peel back the vapor barrier to access the regulator and motor (take care not to damage it).
- Support Glass: Secure the window glass with tape or a suction tool to prevent it falling when the regulator is detached.
- Disconnect Electrical Connector: Unplug the motor connector before unbolting the regulator.
- Unbolt Regulator And Motor: Remove fasteners holding the regulator assembly and motor to the door shell; carefully extract the assembly through the access opening.
- Install New Unit: Fit the new regulator in place, loosely fit fasteners, reconnect the motor, and test window operation before fully tightening.
- Final Checks: Adjust glass alignment if needed, tighten all fasteners to a secure fit, replace the moisture barrier, and refit door trim. Verify smooth, noiseless travel through full travel range.
- Notes: Avoid forcing the glass or regulator. Test the electrical operation before reassembly to confirm correct installation.
Why Choose This Part
Designed to match OEM fitment and mounting points, this regulator mechanism offers a cost-effective way to restore original window function. Using the correct part numbers (9656221480 / 9222V9) helps ensure proper fit and avoids rework during installation.
Compatibility
Primary Fitment: Peugeot 307 CC Front Passenger Side. Compatibility is typically determined by the listed product codes — include these numbers when searching for replacement parts or cross-referencing.
