Description
Cruise Control Stalk Switch CITROEN PEUGEOT
Can Be Fitted To All Models From 2005 Onwards
For COM2005 Controls
Overview
This cruise control stalk (part number 96663636XT) is a direct-fit steering-column control designed for many Citroën and Peugeot vehicles that use the COM2005 control interface. Ideal for professional garages and DIY mechanics, the stalk restores cruise-control functionality, replaces worn switches, and integrates with the original steering wheel controls for a factory-style operation. Compatible with a range of Stellantis models and often searched by the product code 96663636XT or the secondary reference 6242Z8.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën 206, Citroën C5 II, Citroën C8, Citroën Berlingo III, Peugeot 206, Peugeot 407, Peugeot 807, Peugeot Expert II, Peugeot Jumpy II, Peugeot Partner III (And Other Models From 2005 Onwards Using COM2005)
- Product Codes: 96663636XT
- Other Numbers: 6242Z8, COM2005
Compatibility
Designed to work with vehicles equipped with the COM2005 steering control system. Commonly fitted to a variety of Citroën and Peugeot platforms—check the part number against the existing stalk when replacing. Typical fitment includes models listed above and similar platforms from 2005 onward.
Installation Instructions
Installation should be performed by an experienced technician or a competent DIY mechanic following safety procedures. Steps for a typical replacement:
- Disconnect Battery: Always disconnect the negative battery terminal and wait the manufacturer-recommended time before starting to avoid airbag deployment or electrical damage.
- Remove Steering Column Covers: Unscrew and carefully separate upper and lower shrouds to access the stalk mounting points.
- Unplug Electrical Connector: Release the locking tab and gently disconnect the stalk connector from the COM2005 harness.
- Remove Mounting Screws and Extract Stalk: Unscrew the fixing screws and withdraw the stalk from its bracket.
- Fit New Stalk: Position the replacement stalk, secure screws, and reconnect the electrical connector.
- Reassemble Column Covers and Reconnect Battery: Refit covers, tighten fasteners, reconnect the battery, and verify cruise-control operation.
Note: After installation, test all steering-wheel functions and the cruise-control activation to ensure proper operation. Avoid forcing connectors and follow torque specifications for screws where available.
Why This Part Fails
- Mechanical Wear: Frequent use leads to worn contacts or broken internal plastic parts causing intermittent or no response.
- Moisture And Corrosion: Water ingress or condensation in the steering column can corrode electrical contacts.
- Electrical Faults: Poor connector contact, damaged wiring, or short circuits can render the stalk inoperative.
- Impact Damage: Steering-column impacts from accidents can crack the stalk or damage mounting points.
Recommendations For Replacement
- Compare Part Numbers: Always match the part number on the old stalk with 96663636XT and cross-reference 6242Z8 where applicable.
- Inspect Wiring And Connectors: Repair any damaged wiring or corroded pins to prevent repeated failures.
- Check Associated Systems: If cruise-control symptoms persist after replacement, inspect the COM2005 module, brake light switch, and relevant fuses/relays.
- Use Proper Tools: Avoid plastic-cover damage and follow steering-column safety procedures to prevent airbag faults.
Additional Notes
This stalk is intended as a component replacement for vehicles using the COM2005 interface. Many mechanics and DIY enthusiasts search by the part number 96663636XT — include this code when ordering. If you are unsure about fitment for less common models, verify the existing part code on the vehicle before purchase.
