Description
Delphi COM 2000 steering column stalks for Peugeot 206 vehicles. Multifunction control stalk block. Controls lights, fog lamps, cruise control and car radio (radio control needs to be supplied or transferred), front and rear wipers, and horn.
Product Overview
This multifunction steering column stalk assembly is designed for technicians and DIY enthusiasts who need a reliable replacement for worn or faulty stalks on Citroën/Peugeot vehicles. The unit groups multiple functions into one compact module, restoring indicator, lighting, wiper, horn and cruise control inputs to factory behavior. Ideal for quick workshop repairs, this part improves driving safety and restores convenience features without replacing larger, more expensive components.
Key Features
- Multifunction design: integrates light switching, fog lamp control, cruise control and radio interface, front and rear wipers, and horn activation.
- Direct OEM fitment where specified by product codes; commonly used on Peugeot 206 and some related models.
- Supplied as a complete stalk block to simplify replacement and reduce diagnostic time.
- Often searched and identified by original equipment numbers for fast matching.
Compatibility
Primarily intended for Peugeot 206 models. Listings and category data also indicate fitment for certain Peugeot 307 I variants. Because fit depends on exact production equipment and wiring, always match the product codes below with the vehicle’s existing part number before installation.
Installation
Replacement should be performed by a competent mechanic or experienced DIYer. Typical installation steps:
- Disconnect the negative battery terminal before starting to prevent short circuits and airbag deployment.
- Remove the steering wheel trim and lower/upper column covers to access the stalk assembly. Depending on the model, partial removal of the steering wheel may be required to gain clearance.
- Unplug the electrical connectors from the old stalk module and note any connector orientation or locking tabs.
- Transfer any auxiliary controls if required (for example radio control module) or fit the replacement stalk as a complete unit.
- Reassemble the column covers, reconnect the battery and verify all functions: indicators, lights, wipers, horn and cruise control.
Installation Recommendations
- Always disconnect the battery and wait a few minutes before touching electrical connectors or airbag-related components.
- Use the correct Torx/screwdriver bits to avoid damaging trim and fasteners.
- Check connector contacts for corrosion or bent pins; clean before reassembly to ensure reliable operation.
- If cruise control or steering wheel-mounted controls are affected after replacement, verify whether transfer of a dedicated control module or additional adjustments are required.
Common Failure Causes
Steering column stalks typically fail due to normal wear and tear on internal mechanical contacts, oxidation or corrosion of electrical contacts, moisture ingress, or physical damage from impacts. Symptoms of a failing stalk include intermittent or non-functioning indicators, lights or wipers, loss of horn or cruise control function, and erratic behavior of associated circuits. Heavy use and exposure to contaminants accelerate deterioration.
Technical Information
- Manufacturer: Delphi (OEM Application: Stellantis – Citroën / Peugeot)
- Model: Delphi COM 2000 Steering Column Stalk / Multifunction Stalk Block
- Product Codes: 96595073XT, 96511181XT, 96477524XT, 96533567XT
- Other Numbers: 96446871ZL, 96605637XT, 6242E9, 6239Y3, 624265
Why Choose This Part
Using a correct-fit multifunction stalk restores multiple vehicle control functions at once, reducing diagnostic time and repair complexity. For workshops and independent mechanics, matching the OE product codes listed above ensures compatibility and a straightforward replacement process.
Notes
Always confirm the required part number against the vehicle’s existing component. Replacement may require transferring small submodules or connectors; plan the job to avoid unnecessary disassembly. After installation, fully test all related systems before returning the vehicle to service.
