Description
Bulb holder for the right rear lamp for first-series Citroën C1 and Peugeot 107. Functionality of the bulbs themselves is not guaranteed.
Durable replacement bulb socket designed for the rear lamp cluster of first-generation Citroën C1 and Peugeot 107. This component secures the bulb in the housing and provides the electrical contact for tail, brake and indicator bulbs. The item is commonly searched by OE and supplier references listed below, which makes finding the correct part faster for workshops and DIY mechanics.
When a bulb holder fails you may notice intermittent lighting, flickering stop lamps or indicators, blown fuses, or a lamp that does not light at all despite a good bulb. Replacing the holder usually restores reliable contact and lamp function without replacing the entire lamp assembly.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C1 (First Series), Peugeot 107 (First Series)
- Product Codes: 81560-0H060, 6350X8, 6350X6, 634686
- Additional Numbers: 81560 0H060; 6350 X8; 634686
Installation Recommendation
Access the rear lamp cluster by opening the boot and removing the trim or access panel. Unscrew or unclip the lamp assembly from the body, disconnect the wiring harness, then twist or unclip the old bulb holder out of the lamp housing. Transfer serviceable bulbs or install new bulbs of the correct type and wattage, insert the new holder aligning the retention tabs and lock it into place, reconnect the harness and verify all lamp functions before refitting the lamp assembly. Use appropriate trim tools to avoid damaging clips and plastic surfaces.
Apply a thin layer of dielectric grease to the contacts to reduce corrosion and improve long-term reliability. Inspect the lamp housing for melted plastic, broken clips or signs of water ingress; replace the whole assembly if the surrounding structure is compromised.
Reason For Most Common Failure
- Corrosion From Moisture: Water ingress leads to oxidized contacts and poor conductivity.
- Heat And Overload: Use of incorrect bulb wattage or repeated heat cycles can deform or melt the socket contacts.
- Mechanical Stress And Vibration: Road vibration and minor impacts can crack plastic or break retention tabs.
- Aging Of Materials: UV exposure and temperature cycling make plastic brittle over years of service.
Keep a replacement socket in your parts inventory to reduce vehicle downtime. Use the product codes above when searching to quickly identify the correct item for Citroën C1 and Peugeot 107 rear lamp repairs.
