BSC A02-00 Siemens Citroën Peugeot 9655471980 S120017003H

€73.00

Stellantis Citroën Peugeot
9655471980 S120017003H

1 in stock

SKU: 7792-C8_K8 Categories: , ,

Description

BSC A02-00 Siemens VDO for Citroën and Peugeot vehicles. It is from a Peugeot 407.

The BSC A02-00 body electronics module from Siemens VDO is a vehicle comfort/control unit used on PSA (Citroën/Peugeot) platforms. This unit manages multiple body functions and is a direct-fit used part removed from a Peugeot 407. It is aimed at professional workshops and experienced DIY mechanics who require a reliable replacement part identified by original product codes. The module is commonly searched by its part numbers, so the listed product codes help you find the correct item quickly.

Function And Application

The BSC (Body System Controller) controls and supervises several vehicle body functions such as central locking, interior and courtesy lighting, window/door control signals, alarm/immobiliser interactions and other convenience features. In practical terms, a malfunctioning BSC can cause intermittent or permanent failures of locks, lights, interior switches or warning messages on the dashboard. The unit is compatible with Citroën and Peugeot vehicles sharing the same electrical architecture; the supplied unit originates from a Peugeot 407.

Replacement Procedure

Replacing the BSC requires careful handling of electrical connectors and correct coding (or cloning) to restore full functionality:

  • Disconnect Battery: Always disconnect the negative battery terminal before starting work.
  • Access Unit: Remove relevant trim panels in the dash or under the steering column to access the module mounting screws and connectors.
  • Unplug Connectors: Release all locking tabs and unplug multi-pin connectors. Inspect connectors for corrosion or bent pins.
  • Remove Mounting: Unscrew and remove the unit from its bracket, then install the replacement in reverse order.
  • Coding/Cloning: After mechanical installation the unit normally requires cloning or initialization/coding to match the vehicle—see Installation And Coding section below.
  • Final Checks: Reconnect the battery, verify all body functions (locks, lights, windows), and clear any fault codes with diagnostic equipment.

Installation And Coding – Important

  • The unit is used and is “paired” with the original vehicle (VIN/PIN/Keys).
  • Options To Make The Unit Operational:
    1. Cloning Data From The Old Unit (EEPROM/Flash) – After cloning the unit is plug and play.
    2. Virginization And Subsequent Initialization/Telecoding Via DiagBox (Or Online) + Key Adaptation.
  • Recommended To Be Performed By A Specialist With PSA Service Equipment (DiagBox/Lexia/PP2000).
  • Before Removal/Installation Always Disconnect The Battery And Follow The Manufacturer’s Procedure To Avoid Damaging The Unit.

Mounting Recommendations

Handle the module with ESD care, avoid impacts and do not force connectors. Clean connector contacts if corroded and secure the unit in its original bracket to prevent vibration. Use proper torque for screws and verify sealing of surrounding trim to reduce moisture ingress. After installation, perform a full functional test and scan for stored fault codes.

Why This Part Commonly Fails

Common failure causes include water ingress and corrosion, thermal stress and aging of electronic components (dry electrolytic capacitors or cracked solder joints), electrical spikes from poor battery/alternator conditions, and connector corrosion. Symptoms often include intermittent central locking, non-functioning interior lights, erroneous warnings, or complete loss of some comfort functions. There is no fixed service interval; failures typically appear after many years in service or after exposure to moisture and electrical faults.

Technical Information

  • Manufacturer: Siemens VDO
  • Model: BSC A02-00
  • Product Codes: 9655471980, S120017003H
  • Other Numbers: S120017003H (alternate reference), BSC A02 00
  • Source Vehicle: Peugeot 407

Practical Tips For Mechanics

  • Always note the original unit’s connector orientation and any bracket spacers—reusing existing hardware reduces installation time.
  • If planning to swap units between vehicles, prepare for cloning or professional coding to match immobiliser and body functions.
  • Use a full diagnostic session post-installation to ensure adaptation of keys and clearing of learned faults.

This listing is intended for experienced technicians and competent DIYers familiar with PSA electrical systems. Use the product codes above to confirm fitment for specific chassis and production years before installation.

Additional information

Weight 0.4 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.