Description
Right roof airbag for CITROËN C8 PEUGEOT 807. Passenger side.
This roof (curtain) airbag is a direct-fit safety component for the passenger side of Citroën C8 and Peugeot 807 vehicles. Designed to protect occupants’ heads and upper bodies in side-impact collisions and rollovers, the unit contains the folded airbag cushion and the inflator assembly in a slim module that mounts along the headliner and A-/B-/C-pillar trim. Commonly searched by OEM numbers, this airbag is suitable for workshops and experienced DIY mechanics who replace SRS components and clear system faults with proper diagnostic equipment.
Technical Information
- Manufacturer: Stellantis
- Model: Citroën C8; Peugeot 807
- Product Codes: 1400418880, 1495298080, 8329SF
- Additional Numbers: NFP
Function And Typical Faults
The roof (curtain) airbag deploys in certain side-impact scenarios to reduce head and neck injuries. Typical reasons for replacement are deployment after a crash, an SRS warning light indicating an open circuit or short in the curtain airbag circuit, physical damage from interior water ingress or impact, or damaged wiring/connectors caused by trim removal or wear. Airbags themselves are not serviceable; a deployed or electrically faulty module must be replaced.
How The Part Is Replaced
- Disconnect the negative battery terminal and wait at least 10 minutes to allow SRS capacitors to discharge.
- Carefully remove headliner and related trim to access the curtain airbag mounting points—retain fasteners and note clip locations.
- Unplug the airbag electrical connector and remove mounting bolts or clips securing the module.
- Install the new module in reverse order, ensuring connectors are fully seated and wiring is routed without pinching or chafing.
- Reassemble trim, reconnect the battery, and use an SRS-capable diagnostic tool to confirm no fault codes remain and that the airbag system is operational.
Installation Recommendations
- Work Should Be Performed By Qualified Technicians Or Experienced DIY Mechanics Familiar With SRS Safety Procedures.
- Always Disconnect The Battery And Observe The Manufacturer’s Waiting Time Before Touching SRS Components.
- Do Not Attempt To Repair Or Disassemble The Airbag Module Or Inflator.
- Use Correct Tools For Trim Removal To Avoid Damaging Clips And Wiring Harnesses.
- Verify System Status With A Diagnostic Scanner After Installation; Clearing Codes Without Fixing The Cause Is Not Recommended.
Why This Part Most Commonly Fails
The most frequent causes of curtain airbag replacement are deployment during collisions and consequent damage, electrical faults from corroded or damaged connectors, and wiring harness wear or chafing where the harness passes through pillar trims. Water ingress from roof or door seals can also lead to corrosion and electrical faults. Improper previous repairs or rough removal/reinstallation of trim can damage clips or connectors and trigger SRS errors.
This item is commonly searched by its OEM numbers—enter the product codes above to quickly find the correct replacement for Citroën C8 and Peugeot 807 passenger-side roof airbag applications.
