Description
Transmission Mount Silentblock For Citroën C1 And Peugeot 107 First Series
High-quality replacement transmission mount (silentblock) designed for first-series Citroën C1 and Peugeot 107 models. This part isolates gearbox vibrations from the vehicle body, keeps the gearbox aligned with the engine and subframe, and reduces drivetrain noise and harshness. Often searched by product codes 1813J6, 1813E0 and 1813E1, this mount is a common service item during powertrain repairs and replacements.
Benefits And Application
Engineered as a rubber-metal bushing, the transmission mount absorbs torque reactions and lateral movements of the gearbox, improving driving comfort and protecting gearbox mounts and adjacent components from premature wear. Suitable for mechanics and experienced DIYers working on Citroën C1 and Peugeot 107 (first generation). Including original product codes in the listing increases the chance of finding the correct part quickly.
How The Part Works
The silentblock consists of a bonded rubber element between metal brackets. Under load it cushions rotational and translational forces generated by the engine and gearbox. Proper functioning maintains drivetrain geometry and reduces stress transmitted to the chassis, gearbox casing and drivetrain mounts.
Replacement Procedure (Overview)
1. Raise And Secure The Vehicle Safely On Axle Stands. Always Work On Level Ground And Use Approved Lifting Equipment.
2. Support The Gearbox With A Transmission Jack Or Suitable Block To Prevent Movement When Removing The Mount.
3. Remove Any Heat Shields Or Components Obstructing Access To The Mounting Bolts.
4. Loosen And Remove The Fasteners Securing The Mount To The Gearbox And Subframe. Note Bolt Orientation And Any Washers Or Spacers.
5. Replace With The New Mount, Aligning Holes Carefully. Install Fasteners Finger-Tight First, Then Torque To Manufacturer Specification.
6. Lower The Gearbox Gradually Onto The New Mount, Recheck Torque And Reinstall Removed Components.
For Safety: Use Proper Tools, Replace Damaged Fasteners, And Follow The Vehicle Manufacturer’s Torque Specifications And Procedures.
Technical Information
- Manufacturer: Stellantis / Citroën / Peugeot
- Model: Citroën C1 (First Series), Peugeot 107 (First Series)
- Product Codes: 1813J6, 1813E0, 1813E1
- Other Numbers: Common Stellantis Reference Numbers As Listed Above
Installation Recommendations
Replace Mounts In Pairs Or As Required To Maintain Even Support If Adjacent Mounts Show Wear. Always Use The Correct Torque Values Specified By The Manufacturer And Inspect Surrounding Components (Gearbox Brackets, Fasteners, Subframe) For Damage Or Corrosion. If You Are Unsure About Jacking Or Supporting The Gearbox, Have The Job Performed By A Professional Workshop.
Most Common Failure Causes
Transmission mounts typically fail due To Rubber Degradation From Age, Oil/Fluid Contamination, Repeated High Engine Loads (Aggressive Driving), Or Mechanical Damage From Impacts And Road Conditions. Symptoms Include Excessive Vibration, Gearbox Movement Under Acceleration, Clunking On Gear Changes, And Misaligned Drivetrain Feel.
Additional Notes For Buyers
Searching By Reference Numbers 1813J6, 1813E0 Or 1813E1 Helps Ensure Fast Identification. Suitable For Routine Replacement During Clutch, Gearbox Or Engine Mount Service Intervals. Choosing A Correctly Fitted Mount Restores Driving Comfort And Protects The Gearbox From Additional Stress.
