Description
Complete antenna with cable for Citroën Xsara Picasso vehicles.
This Complete Antenna Assembly with Cable is a direct-fit replacement for Citroën Xsara Picasso radio systems. Supplied with the mast and pre-terminated lead, it restores reliable AM/FM reception and eliminates noise caused by damaged aerials or corroded connections. Ideal for professional workshops and DIY mechanics who search by OE number — the assembly is referenced under multiple Stellantis codes commonly used in parts catalogs.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Citroën Xsara Picasso
- Product Codes: 9658881880, 6561A0, 6561EF, 6561A1
- Additional Numbers: OE References Used In Stellantis Parts Lists
Compatibility And Fitment
Primary Fitment: Citroën Xsara Picasso. The antenna assembly is intended for vehicles equipped with the OE reference numbers listed above. Customers often locate this part by entering one of the product codes into catalogues or search engines. Always compare the OE code in the vehicle’s parts list with the product codes shown here to confirm match.
Function And Typical Failures
The antenna assembly receives AM/FM radio signals and transfers them via the coaxial cable to the head unit. Typical failure modes include:
- Broken Or Bent Mast Because Of Mechanical Impact (car wash, vandalism, accidental damage).
- Corrosion At The Base Or Connector Leading To Poor Contact And Intermittent Reception.
- Water Ingress Into The Connector Or Cable Causing Shorting Or Signal Loss.
- Damaged Or Frayed Coaxial Cable Resulting In Weak Or No Signal.
Service Life Depends On Exposure To Weather And Mechanical Damage; In Many Cases Antennas Last 8–15 Years Under Normal Conditions.
Installation Recommendation
Basic Replacement Steps (General Overview):
- Park Vehicle On Level Ground And Ensure Ignition Is Off.
- Remove Interior Trim Or Roof Molding To Access Antenna Base (varies By Model).
- Disconnect Antenna Connector From Head Unit Or Amplifier.
- Unscrew The Antenna Mast/Base Fasteners From The Roof And Remove The Old Unit.
- Feed The New Cable Through The Roof Opening, Seat The New Base, And Secure Fasteners To The Manufacturer’s Specified Tightening Values.
- Reconnect The Antenna Connector And Refit Trim Or Sealant As Required To Prevent Water Ingress.
- Test Reception Before Completing Reassembly.
For Best Results Use Proper Trim Tools To Avoid Breakage Of Clips Or Panels. If The Vehicle Has An In-Line Antenna Amplifier Or Integrated Mast Amplifier, Inspect The Connector And Power Supply To The Amplifier When Troubleshooting Reception Issues.
Why This Part Is Commonly Replaced
Antennas Are Exposed Components; They Suffer From Weathering, Mechanical Damage And Corrosion Over Time. Common Triggers For Replacement Are Poor Radio Reception, Intermittent Signal, Audible Crackling, Or Visible Damage To The Mast Or Connector. Replacing The Entire Assembly With Correct OE Codes Restores Reliable Reception And Prevents Recurring Issues Due To Corroded Connections.
