Description
Front and rear wiper stalk located under the steering wheel for Citroën and Peugeot vehicles. It comes from a Peugeot 406.
This steering column wiper stalk (wiper switch) is a direct-fit control unit for front and rear wipers and washer functions on many Citroën and Peugeot models. Designed for professional garages and DIY mechanics, it carries original equipment part references and is ideal when the factory stalk shows intermittent operation, fails to switch speeds, or loses the rear wiper/washer function. Use the part numbers below to quickly find the exact replacement and speed up diagnostics.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Peugeot 406; Compatible With: Peugeot 206, 406, Berlingo I, Partner II, Xsara, Xsara Picasso and corresponding Citroën variants
- Product Codes: 96205589ZL, 6239A7
- Other Numbers: Not Specified
Function
The stalk assembly installed under the steering wheel controls intermittent and continuous front wiper speeds, rear wiper operation (if equipped) and the washer pump activation. It houses the user interface (lever and rotary switches) and internal electrical contacts that send signals to the wiper motor(s) and washer system.
Typical Symptoms Indicating Replacement
Common signs this stalk needs replacement include: wipers that do not change speeds, intermittent wiping not working, rear wiper or washer not responding, the lever not returning to park position, or loose/broken lever action. Electrical intermittency or complete loss of function while the motors themselves are known good are classic indicators.
Why This Part Fails
Failures are usually caused by wear of internal contact surfaces over many cycles, contamination from moisture or road salt leading to corrosion, broken plastic detents or snap features from repeated use, and electrical faults in the internal switch assemblies. Older vehicles or those exposed to humid environments and frequent winter conditions are more prone to premature failure.
Installation Recommendations
Always follow safe working practices when replacing the stalk under the steering wheel. Recommended steps:
- Disconnect the negative battery terminal and wait several minutes to reduce risk related to the airbag system.
- Remove lower and upper steering column trim panels to access the stalk mounting screws and electrical connector(s).
- Unplug the electrical connector(s) and remove any screws or clips securing the stalk assembly.
- Fit the replacement stalk, reconnect the connector(s) and reassemble the trim panels. Ensure the lever position and all functions (front/rear wiper, intermittent settings, washer) operate correctly before returning the vehicle to service.
- Take care not to disturb the clock spring; incorrect handling may affect airbag and steering wheel controls.
Service Life And Replacement Interval
There is no fixed interval for replacement; lifespan depends on usage and environment. Many stalks last well over a decade, but high-use vehicles or those exposed to moisture and road salt may fail earlier. Replace the stalk when user controls become unreliable, noisy, or mechanically damaged.
Using the correct part numbers (96205589ZL / 6239A7) ensures compatibility with listed models and simplifies ordering and stocking for repair shops. Ideal for mechanics and experienced DIYers who want a straightforward swap to restore full wiper and washer control.
