Description
Seat Airbag For CITROËN C2 C3 HZQ – Zephir Gray (Zephir) Driver Seat
Product Overview
This driver seat airbag is designed for Citroën C2 and Citroën C3 vehicles and is specified in Zephir gray (color code HZQ). It is a direct-fit safety component used in the driver’s seat to provide occupant protection in the event of a collision. Commonly searched by part numbers, this unit fits original equipment applications on compatible C2 and C3 models and is suited for professional workshops and experienced DIY mechanics who perform airbag and interior repairs.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C2; Citroën C3 (C3 I – first generation)
- Product Codes: 96462517ZQ
- Other Numbers: 8216Q8
- Position: Driver Seat (Left)
- Color: Zephir Gray (HZQ)
Installation Recommendations
- Follow Proper Safety Procedure: Before any work on the supplemental restraint system (SRS), disconnect the vehicle battery and wait a minimum of 10 minutes to allow capacitors in the airbag control unit to discharge.
- Seat Removal: If required, unbolt and remove the seat to gain access to the seat airbag module. Keep track of fasteners and seat position adjustments for correct reinstallation.
- Connector Handling: Carefully unplug the airbag connector(s); avoid pulling on wires. Inspect connectors and wiring for corrosion or damage before installing the new unit.
- Mounting: Fit the replacement airbag to the original mounting points and secure fasteners to manufacturer specifications. Do not overtighten; follow the vehicle repair manual where available.
- Reset And Diagnostics: After installation, use an SRS-capable diagnostic tool to clear fault codes and verify proper communication with the airbag control unit. Verify that the SRS warning light behaves correctly on ignition.
- Qualified Installation Recommended: While an experienced DIYer may perform the replacement, installation by a qualified technician is recommended when in doubt, due to the safety-critical nature of the component.
Common Failure Causes
- Deployment In A Collision: The airbag is a pyrotechnic device and must be replaced after any deployment event.
- Electrical Issues: Faulty wiring, damaged connectors, or corrosion can lead to SRS fault codes and disable the airbag circuit.
- Physical Damage: Damage to the seat structure, trim, or airbag cover—often from impacts or aggressive removal—can impair proper deployment.
- Connector Wear And Moisture Ingress: Long-term exposure to moisture or contaminated connectors may cause poor contact and intermittent faults.
- Control Unit Faults: While less common, faults in the airbag control unit or related sensors can cause the system to register errors and inhibit deployment.
Why Choose This Part
Searching by OE codes like 96462517ZQ or reference 8216Q8 will quickly return this driver seat airbag for Citroën C2 and C3 models. The correct color match (Zephir Gray HZQ) preserves interior appearance while restoring occupant protection to factory intent. For workshops and competent DIYers, this unit allows efficient replacement when addressing SRS faults or after collision repair.
