Description
Steering Wheel Airbag For Peugeot 307 Facelift. Version HZR – Gray Astrakhan.
This steering wheel airbag is designed for Peugeot 307 facelift models and comes in the HZR trim with Gray Astrakhan finish. It is an original-equipment style SRS airbag module intended to replace a deployed or damaged steering airbag and restore occupant protection and correct functionality of the SRS system. Ideal for professional workshops and competent DIY mechanics, the unit is commonly searched by its product codes and fits into the factory steering wheel assembly without altering cabin aesthetics.
Technical Information
Manufacturer: Stellantis / Peugeot
Model: Peugeot 307 (Facelift)
Product Codes: 96821872ZR, 4112KA
Additional Numbers: NFP
Key Features and Function
- SRS Steering Wheel Airbag Module: Deploys in a frontal impact to reduce injury risk to the driver.
- Trim and Finish: HZR configuration in Gray Astrakhan to match facelift interior trims.
- Plug-and-Play Replacement: Designed to fit original steering wheel mounting points and airbag connectors on compatible Peugeot 307 facelift models.
- Compatibility Notes: Frequently searched by OE codes 96821872ZR and 4112KA—use these numbers when locating the correct item.
Installation Recommendations
- Safety First: Always disconnect the negative battery terminal before starting work and wait the manufacturer-recommended time for the SRS system capacitors to discharge (commonly at least 10 minutes).
- Removal: Access the airbag retaining fasteners (usually located behind the steering wheel spokes), release the module carefully, and unplug the airbag connector(s) using the correct terminal release tool or procedure.
- Inspection: Check the condition of the steering column, clockspring (spiral cable) and wiring harness for wear or damage. Replace the clockspring if there is any sign of abrasion, broken wires, or persistent SRS faults.
- Fitting: Install the new airbag module in correct orientation, ensure connectors are fully seated and locked, and tighten fasteners to the manufacturer’s torque specifications when available.
- Post-Installation: Reconnect the battery and use an appropriate diagnostic tool to verify SRS system status and clear any stored fault codes. Ensure the airbag warning lamp extinguishes after the self-check.
- Recommendation: While experienced DIYers can perform the replacement, airbag work involves safety-critical components—consider professional installation if you are not fully comfortable with SRS procedures.
Why This Part Most Commonly Fails
- Deployment During a Collision: Airbags are single-use safety devices and must be replaced after deployment in any crash where the system was activated.
- Physical Damage: Damage to the steering wheel, airbag cover, or module (for example from impact, heavy wear, or vandalism) can necessitate replacement.
- Connector Corrosion or Wiring Damage: Moisture, chemical contamination or chafing of wiring can cause poor connections or short circuits leading to SRS faults.
- Associated Component Failure: A faulty clockspring (spiral cable) or steering column damage can produce SRS warnings and intermittent airbag function even if the airbag module itself is intact.
- Age And Environmental Stress: Although airbags are designed for long service life, extreme heat, prolonged UV exposure or interior deterioration can affect the cover and mounting integrity over many years.
For fast parts lookup, use the product codes 96821872ZR or 4112KA when searching catalogs or ordering. The unit is targeted to Peugeot 307 facelift interiors in HZR gray trim and is suitable for professional replacement to restore full SRS functionality.
