Description
Right front window retract mechanism for PEUGEOT 207 cars
Passenger door electric window opener
2 PIN
Part description
This used window mechanism is for a Peugeot 207 and serves as an electric window opener for the passenger door. It is an important part of the window lowering system, which ensures the smooth movement of the window during operation. Thanks to the marking 2 PIN, it is advisable to carefully compare the connector and the design of the part with the existing piece before assembly.
Auto mechanics and home repairers often look for this part by serial number, so the codes 9661162280 and 9222W9 are especially important. A used original part can be a suitable choice when repairing a non-functioning or damaged window download without the need to purchase a new part.
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 207
- Other numbers: 9661162280, 9222W9, 2 PIN
Product codes
- Product codes: 9661162280, 9222W9
- Models: Peugeot 207
Installation recommendations
Generally/typically for this type of part, the exact replacement procedure may vary depending on the specific design of the door and the car’s equipment, therefore it is always necessary to compare the new and original part before the installation itself.
1) Before assembly
- Check that the side of the part, the type of connector and the overall design of the mechanism match.
- Compare product numbers 9661162280 and 9222W9 with the old part.
- Inspect guide parts, mounts, electrical connector and condition of moving parts.
- Check whether the part is mechanically damaged, deformed or excessively worn.
2) Necessary tools and materials
- Set of common hand tools
- Screwdrivers and plastic levers for panel removal
- Work gloves
- Detergent for removing dirt
- Suitable for light treatment of moving parts, if needed
3) Step-by-step assembly procedure
- Turn off the ignition and secure the vehicle against movement.
- Remove the inner trim of the respective door to gain access to the window retract mechanism.
- Carefully disconnect the electrical connector of the original mechanism.
- Ensure the window glass in a safe position so that it does not move or be damaged during work.
- Unfasten the old mechanism and carefully remove the part from the door.
- Compare the old and new mechanism, including fit, shape and 2 PIN connector.
- Clean the assembly area and check that the connected parts are not damaged.
- Place the used mechanism in the correct place and fix it in the same way as the original part.
- Connect the electrical connector and check for proper seating.
- Carefully connect the mechanism to the window according to the original arrangement.
- Before fully assembling the door, perform a basic test of the mechanism.
- If the operation is smooth and without stuttering, refit the door trim and all removed parts.
-
4) Post-assembly checks and function verification
- Verify that the window moves smoothly throughout its range.
- Check the mechanism for unusual noises.
- Check that the window fits correctly and does not get stuck anywhere.
- After reassembling the door, try the function several times in a row.
5) The most common assembly mistakes + how to avoid them
- Swap part side – always verify it is the right front mechanism before fitting.
- Connector mismatch – check the 2 PIN design before fitting the part.
- Door panel damage – use appropriate tools for removing interior panels.
- Insufficient securing of glass – glass must be securely fixed during work.
- Assembly without trial verification – always test the function of the mechanism before final assembly of the door.
Reasons why the part is damaged
- Normal wear and tear from long term use.
- Increased stress when frequently pulling and pulling the window.
- Window jamming in the guide that overloads the mechanism.
- Moisture and dirt inside the door.
- Damage to electrical connections or contacts.
- Mechanical damage after disassembly, impact or improper assembly.
