Description
Right Boot Lock For Peugeot 307 CC With Functional Microswitch 8484L4
Overview
This Right Boot Lock Is A Direct Replacement Part Intended For Peugeot 307 CC Vehicles. It Includes A Functional Microswitch (8484L4) Responsible For Signalling The Boot’s Closed/Locked State To The Vehicle’s Central Locking And Interior Warning Systems. Suitable For Automechanics And Experienced DIY Enthusiasts, The Unit Matches Common OEM Product Codes, Making It Easy To Find And Install.
Key Features And Benefits
– Direct Fit For Peugeot 307 CC, Designed To Replace The Original Boot Latch Assembly.
– Integrated Microswitch Ensures Reliable Electrical Contact For Central Locking And Interior Indicators.
– OEM Product Codes Included For Easy Cross-Reference (See Technical Information).
– Robust Construction To Withstand Repeated Use And Exposure Typical For Trunk Mechanisms.
– Saves Workshop Time By Offering A Ready-To-Install Unit That Minimizes Diagnostic And Repair Complexity.
How It Works
The Boot Lock Mechanically Secures The Boot Lid And Contains An Electrical Microswitch That Detects The Latched Position. When The Lid Is Closed, The Microswitch Sends A Signal To The Body Control Module Or Central Locking Unit Indicating A Secure Closure. A Faulty Lock Or Microswitch Can Prevent The Boot From Locking Properly, Trigger Interior Warning Lights, Or Interfere With Remote Locking Functions.
How To Replace
1. Prepare: Work With The Vehicle On A Flat Surface. Ensure The Boot Is Supported Open Safely With A Prop Or Assistant.
2. Access: Remove Interior Boot Trim Panels To Expose The Lock Assembly. Keep Fasteners Organized For Reassembly.
3. Disconnect: Unplug The Electrical Connector To The Microswitch. Release Any Linkages Or Cables Attached To The Latch.
4. Remove: Unscrew The Fastening Bolts Securing The Lock To The Boot Lid And Withdraw The Old Assembly.
5. Install: Position The New Lock, Secure Bolts Snugly, Reconnect Linkages And Electrical Connector.
6. Test: Before Reassembling Trim, Test Locking Function With Remote And Manual Operation To Confirm Microswitch Signal And Mechanical Engagement.
7. Refit: Reinstall Interior Panels And Verify Smooth Operation Of The Boot Lid And Locking Mechanism.
Note: Disconnecting The Battery Is Recommended When Working With Electrical Connectors On Vehicles With Sensitive Electronics. Always Take Care To Avoid Pinching Wiring Or Damaging Trim Clips.
Technical Information
- Manufacturer: Stellantis (Peugeot/Citroën)
- Model: Peugeot 307 CC
- Product Codes: 9651004580, 8484L4, 8484Z3
- Additional Numbers: NFP
Installation Recommendations
– Use Correct Tools To Avoid Rounding Fasteners; A Torx Or Metric Socket Set Is Typically Required.
– Inspect And Clean The Locking Striker On The Boot Frame To Ensure Proper Engagement.
– Apply A Light Spray Of Contact Cleaner To The Electrical Connector If Corrosion Is Present, Then Use Dielectric Grease To Protect The Connection.
– Check Boot Alignment After Installation; Misalignment Can Cause Premature Wear.
– Test The Microswitch Signal With A Multimeter Or By Observing The Vehicle’s Interior Indicator/Lights During Operation.
Most Common Failure Reasons
– Corrosion And Water Ingress Leading To Electrical Faults In The Microswitch Or Connector.
– Mechanical Wear Of The Latch Components From Frequent Use, Causing Poor Engagement.
– Broken Or Stretched Linkages/Cables That Prevent Proper Actuation.
– Impact Damage From Closing With Obstructions Or From Minor Accidents Affecting Alignment.
Replacing The Lock Assembly Addresses Both Electrical And Mechanical Faults In One Step, Reducing Repeat Visits And Diagnostic Time.
Why Choose This Part
With Known OEM Reference Numbers And An Integrated Microswitch, This Boot Lock Offers A Practical, Straightforward Replacement For Workshops And DIYers Who Need A Reliable Solution For Peugeot 307 CC Trunk Lock Issues. The Included Microswitch Restores Proper Signalling To The Vehicle’s Locking System, Helping Eliminate Interior Warning Lights And Ensuring Secure Closure.
