Description
Left Seat Airbag For Peugeot 207 Vehicles
Color HZD – Mistral Black
Driver’s Seat
Overview
Driver seat side airbag designed for Peugeot 207 vehicles. Frequently searched under part numbers 96546687ZD and 8216NE, this airbag module is intended for professional workshops and experienced DIY mechanics who require a direct-fit replacement to restore occupant protection after repair or interior refurbishment.
Applications
- Peugeot 207 — Driver Seat (Left)
Function And Purpose
The Seat Side Airbag Protects The Driver’s Torso And Pelvis In A Side Impact By Rapidly Inflating To Cushion And Reduce The Force Of Contact With Interior Structures. It Operates As Part Of The Vehicle’s Restraint System Together With Seatbelts And Other Airbag Modules.
Common Failure Modes
Airbags Are Most Commonly Removed Because They Have Deployed In A Collision. Other Typical Causes Of Failure Include Electrical Connector Corrosion, Wiring Harness Damage Due To Seat Movement Or Previous Repairs, Moisture Ingress, And Physical Damage To The Airbag Cover That Can Impede Correct Deployment.
Installation
Replacement Should Be Carried Out By A Trained Technician Or An Experienced DIY Mechanic Following The Manufacturer’s Procedure. Summary Of Typical Steps:
- Disconnect The Vehicle Battery And Wait At Least 10–15 Minutes For The SRS System Capacitors To Discharge.
- Remove Seat Trims And Bolts To Access The Airbag Module.
- Carefully Disconnect The Airbag Electrical Connector Without Pulling On The Wires.
- Install The New Airbag In The Correct Orientation And Secure All Fasteners According To The Manufacturer’s Instructions.
- Reconnect The Battery And Use Appropriate Diagnostic Equipment To Confirm Correct System Operation And Clear Any Fault Codes.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 207
- Product Codes: 96546687ZD, 8216NE
- Additional Numbers: Color Code HZD — Mistral Black; Position: Left (Driver)
Installation Recommendations
Always Follow The Vehicle Manufacturer’s Service Manual And Use Correct Tools. Replace Any Damaged Connectors Or Clips During Installation. Check The Airbag Wiring For Abrasion Or Pinching When Reassembling The Seat. After Installation, Verify The SRS Warning Light Behaviour With Suitable Diagnostic Equipment.
Most Common Reason For Part Failure
The Primary Reason For Replacement Is Deployment Due To A Side Impact Collision. Additional Causes Include Electrical Connector Faults, Wiring Damage, Corrosion, Or Physical Damage To The Module That Prevents Proper Deployment.
