Description
Left front seat belt for Citroën C5 II vehicles
Driver’s Side
Color FXX- – Black
This Left Front Seat Belt Assembly is a direct-fit safety component for Citroën C5 II models. Designed for workshop use and self-repair by experienced DIYers, the assembly restores original restraint function on the driver side and meets the fitment expectations for OE-coded parts (see Technical Information below). Ideal for replacing worn, frayed, locked or crash-activated belts, this unit helps return the vehicle to safe roadworthy condition quickly and reliably.
Key Features
Left front (driver side) seat belt assembly compatible with Citroën C5 II. Durable black webbing (Color FXX) with integrated retractor and locking mechanism. Supplied with the product codes shown so mechanics and parts managers can match the replacement quickly. Manufactured under the Stellantis/Citroën/Peugeot umbrella and intended for direct replacement of the original left front unit.
Technical Information
- Manufacturer: Stellantis / Citroën / Peugeot
- Model: Citroën C5 II
- Product Codes: 96501389XX, 8974Z0, NFP
- Additional Numbers: Not Available
Function And Purpose
The seat belt restrains and secures the driver during normal driving and locks the webbing under sudden deceleration or impact. The built-in retractor maintains proper webbing tension and allows free movement in normal conditions while locking instantly when rapid movement is detected. Properly functioning seat belts are essential for occupant protection and for correct deployment of other safety systems.
How To Replace (General Guide For Experienced Technicians)
- Ensure Safety: Disconnect the vehicle battery and wait at least 10 minutes before starting work to reduce the risk associated with SRS/pyrotechnic components.
- Access Trim: Remove the necessary interior trim panels to reach the shoulder anchor, retractor, and lower mounting points. Keep fasteners and clips organized.
- Unbolt Anchors: Unbolt the lower anchor and shoulder anchor (if applicable), then remove the bolts securing the retractor. Retain any washers or spacers for reassembly.
- Fit New Unit: Position the new seat belt assembly, ensuring the webbing feeds correctly and the retractor is oriented as the original. Refit bolts and anchors and tighten to the manufacturer’s torque specification.
- Check Operation: Reconnect the battery, verify smooth webbing travel and positive locking under a sharp pull. Confirm there are no SRS warning lights or fault codes after installation.
- Final Fitment: Reinstall trim panels and perform a functional check while seated to ensure comfortable routing and buckle engagement.
Installation Recommendations
Always Follow Manufacturer Torque Specifications And SRS Safety Procedures. Use Proper Tools And Thread Lock Where Specified. Replace Any Mounting Bolts That Show Damage Or Stretch. If The Vehicle Has Been Involved In A Collision, Inspect Related SRS Components And Replace Any Components That Have Been Activated Or Damaged.
Most Common Reasons For Failure
Seat belts typically remain serviceable for many years, but common failure modes include webbing wear and fraying from abrasion, contamination by oils or chemicals, retractor jamming from dirt or internal corrosion, and activation of a pretensioner during a crash. Mechanical damage from improper use or sharp edges can also compromise belt integrity. After an impact, the belt assembly should be inspected and replaced if the pretensioner has activated or if any visible damage is present.
Compatibility Note
Designed Specifically For Citroën C5 II Left Front (Driver Side). Use The Product Codes Listed In The Technical Information To Confirm Fitment Against The Vehicle’s Parts List Or Parts Catalog.
Choose This Seat Belt Assembly When You Need A Direct-Fit Replacement For The Driver Side Of Citroën C5 II Vehicles—clear identification by product codes ensures fast parts matching and efficient workshop turnaround.
