Negative battery terminal cable Citroën Peugeot 9816218080

€30.00

Stellantis CITROEN PEUGEOT
9816218080

1 in stock

SKU: 9980-P5_K18 Categories: , , ,

Description

Negative battery cable for CITROEN, PEUGEOT and other Stellantis models

Part description

The used negative battery cable 9816218080 connects the negative terminal of the vehicle battery to the vehicle’s electrical ground. Reliable grounding is important for starting and for the correct operation of electrical accessories. Replacing a damaged cable can help resolve problems caused by a broken conductor, corrosion or increased contact resistance at its connections.

This part is a suitable choice when repairing damaged battery wiring. When selecting it, refer primarily to the product number 9816218080 and compare the cable design, terminals and mounting points with the original part. The model name alone is not enough to determine whether the design matches.

Technical information

  • Manufacturer: not specified; listed in the source materials as Stellantis / CITROEN / PEUGEOT.
  • Model: Citroën Berlingo K9, FIAT DOBLO III, OPEL COMBO E K9, PEUGEOT RIFTER, Toyota ProAce City.
  • Part type: negative battery cable.
  • Condition: used automotive part.
  • Catalog classification: 1.6 HDI, electrical components, wiring harnesses, engine harnesses. This classification alone does not confirm suitability for a specific engine variant.
  • Additional numbers: not specified.

Product codes

  • Product codes: 9816218080.

Compare the number with the marking on the original part, if legible. Also check that the shape, length, connection points and any electrical connectors match.

Installation recommendations

The following procedure generally applies to this type of part. Exact access to the cable, its mounting method, and the procedure for disconnecting and reconnecting the battery depend on the specific model and vehicle configuration. Follow the manufacturer’s service instructions, particularly the requirements for allowing the onboard electronics to enter sleep mode.

1) Before installation

  • Compare the product number, cable length and routing, terminal shape, connection lugs and mounting points with the original part.
  • Inspect the insulation along the entire accessible length. The cable must not have exposed wires, signs of overheating or damage around the terminals.
  • Check the terminal and lugs for corrosion, cracks and deformation. Check that the wires are not loose at the terminals.
  • If the wiring includes a connector or sensing element, compare its design and check that it is undamaged. The source materials do not state whether this part includes these components.
  • Also check the condition of the battery terminal and the opposing contact surfaces. Installing a new cable will not fix a fault at a damaged connection point.

2) Tools and materials required

  • Hand tools suitable for the fasteners used and a torque wrench for tightening to the manufacturer’s service specifications.
  • Materials for carefully cleaning electrical contacts and a clean cloth.
  • Protective gloves, safety glasses and suitable insulating cover for the disconnected lead.
  • A multimeter for checking electrical continuity and, if necessary, measuring voltage drop.

3) Step-by-step installation procedure

  1. Park the vehicle safely, switch off the ignition and all electrical accessories. Keep the key away from the vehicle.
  2. Allow the onboard electronics to enter sleep mode according to the manufacturer’s instructions. Do not activate electrical systems unnecessarily while waiting.
  3. Gain access to the battery and cable routing. Before removal, take photos of the routing, mounting points and orientation of each terminal.
  4. Disconnect the battery according to the manufacturer’s procedure; on a conventional system, disconnect the negative terminal first. Secure the disconnected terminal to prevent accidental contact with the battery post.
  5. If the positive lead also needs to be disconnected, do so only after disconnecting the negative lead and cover it safely. Do not allow a tool to bridge the battery terminals.
  6. Release the cable’s other connections and any connectors. Disconnect connectors by their housings after releasing the latches; do not pull on the wires.
  7. Remove the cable from its holders and carefully take it out. Do not damage nearby wiring or mounting components.
  8. Clean the contact surfaces and inspect the mounting connections. Address any significant corrosion or mechanical damage to the opposing contacts before installation.
  9. Position the replacement cable along the original route without tension, twisting or sharp bends. Secure it in the holders so that it cannot chafe or touch hot or moving parts.
  10. Attach the terminals away from the battery and connect any connectors. Tighten the connections to the manufacturer’s specifications; do not deform the terminals or lugs with excessive force.
  11. Reconnect the battery according to the manufacturer’s instructions. If both terminals were disconnected, on a conventional system connect the positive terminal first and the negative terminal last. Perform any required procedures after power is restored.

4) Post-installation checks and function verification

  • Check that the terminal is seated securely, the connections are tight and the cable is routed safely.
  • Check starting and the operation of electrical accessories. A qualified technician can check the voltage drop on the negative lead under load according to the service procedure.
  • After a short period of operation, check for the smell of overheated insulation or other signs of connection heating. If a fault is suspected, switch off the engine and do not drive the vehicle further until the cause has been resolved.
  • If everything is in order, take a short test drive and then visually check that the cable remains properly secured.

5) Common installation mistakes and how to avoid them

  • Installing on corroded contacts: clean and inspect both mating surfaces before assembly.
  • Insufficient or excessive tightening: follow the service specifications so the connection is not loose and the terminal does not crack.
  • Incorrect routing: follow the original routing and use the designated holders so the cable is not under tension or exposed to chafing.
  • Disconnecting the battery before the electronics have gone to sleep: follow the manufacturer’s procedure and do not work with the ignition on.
  • Confusing it with a similar-looking cable: before installation, compare the part number and all terminals and connections.

Reasons why the part becomes damaged

The following are common causes of damage to negative battery cables in general; they do not describe the condition of this specific part:

  • Corrosion of terminals and connection lugs due to moisture and dirt, which worsens electrical contact.
  • Loose connections, which increase contact resistance and can cause localized heating.
  • Vibration and mechanical stress, especially if the cable is stretched or mounted incorrectly.
  • Chafing of the insulation against surrounding components when a mounting point is missing or damaged.
  • Rough handling when replacing the battery, such as prying at the terminal, pulling on the wire or overtightening.
  • Aging and heat stress, which can cause the insulation to become brittle and weaken the lead near the terminals.

Additional information

Weight 0.6 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.