Description
Lock Cable 9136CQ Right front door for Citroën C-Crosser Peugeot 4007
The right front door lock for the Citroën C -Crosser and the Peugeot 4007. This is an original part of the PSA production, which ensures mechanical connection of the door handle to the lock and reliable opening from the inside and from the outside. Ideal replacement for damaged or pulled cable (bowden) of the castle, often also sought under OEM codes 9151CG and 9151CJ.
Functions and typical manifestations of defects: The cables transmit the tension from the inner/outer handle to the lock mechanism. During wear, there may be difficult opening, a great will in the handle, the need to “drag” the handle or the inability to open the door. Most often, the ends of the cable and sections in sharp bends leave, where the cable is pulled or stuck over time.
Installation Note: Replacing is performed after the door fill is removed. After reversing the clamps and bolts, carefully remove the tapecírunk, disconnect the rods from the handle and lock and attach the ropes in the same line as the original (pay attention to the correct ending). For the right front doors (for cars with left -hand drive a party of the passenger), we recommend checking the status of the plastic clips of filling and possibly replace them. Torx screws and clips are usually used to disassemble.
Compatibility: Designed for Citroën C – Crosser and Peugeot 4007. These cars were produced in 2007–2012; The ropes are the right front door for the position. Before purchasing, compare the OE/OEM number and the location of the part on the car so that the assembly and function are 100% identical to the original part.
technical information
- Manufacturer: PSA (Citroën/Peugeot)
- Model: Citroën C -Crosser (2007–2012), Peugeot 4007 (2007–2012), right front doors
- Product codes: 9151cg, 9151CJ
- additional numbers: 9136CQ, 91356CQ
Advantages of the original part: the exact length and ending of the ropes for the correct operation of the castle, quiet and smooth operation without stuck and long life in the correct guidance. To be sure, always compare the shape/ends of the cable and the above codes with your original work.
