Description
Left side mirror electrically adjustable and folding for Citroën C8 Peugeot 807. Color KGB – Ethel Green Paint. Painted Area Slightly Scuffed. 9 Pin 5+2+2. Driver Side.
This left driver-side exterior mirror is a used replacement part suitable for Citroën C8 and Peugeot 807 models. It combines electric adjustment and power folding in a single assembly, making it a direct-fit option for vehicles equipped with a 9-pin mirror harness (5+2+2). The painted housing shows minor scuffing consistent with normal service wear. Many technicians and DIYers search by product code, so this unit is listed with common reference numbers to simplify finding the correct replacement.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C8, Peugeot 807
- Product Codes: 14009348S2, 14009338S2, 8153FS
- Additional Numbers: KGB (Color Code), Connector: 9-Pin (5+2+2)
Compatibility And Key Features
Designed for the driver side of Citroën C8 and Peugeot 807. Features electric mirror adjustment and power folding. The 9-pin connector (configured as 5+2+2) matches the multi-pin door harnesses used on many Stellantis vehicles of this generation. Painted in Ethel Green (KGB) with slight scuffing on the painted surface.
Installation Recommendations
Typical replacement steps for a door mirror assembly:
- Remove the interior trim or triangular cover on the door to access the mirror mounting bolts and electrical connector.
- Disconnect the mirror electrical connector and carefully release any clips holding the harness.
- Remove the mounting bolts and take out the old mirror assembly.
- Fit the replacement mirror, secure the mounting bolts to manufacturer torque settings, and reconnect the electrical connector.
- Before reassembling trim, test all mirror functions: electric adjustment, folding mechanism, heated glass and indicator (if equipped).
For best results use the correct trim tools to avoid damage to interior panels. Test the mirror functions before final reassembly. If the vehicle is equipped with additional door electronics or integrated indicators, verify function after installation.
Why This Part Fails Most Often
- Impact Damage: Collisions, parking knocks and side-swipes are the most common causes of mirror breakage or housing damage.
- Water Ingress And Corrosion: Moisture can corrode connectors or motors, causing intermittent or permanent failure of adjustment or folding functions.
- Wiring And Connector Wear: Broken wires or corroded pins in the door harness can interrupt power or signal paths to the mirror.
- Mechanical Wear: Folding mechanism gears and pivots can wear or jam after many cycles or following impact.
- Surface Damage: Painted housings are susceptible to scratches and scuffs from road debris and minor impacts (noted on this unit).
This unit is offered as a direct replacement reference for mechanics and experienced DIYers. Verify connector pinout and functions match your vehicle harness before installation and perform a full functional check after fitment.
