Description
Set Of Tools: Jack, Wheel Wrench, Towing Eye, With Body-Mounted Holder. Vehicle Jack For Citroën C3 Picasso, C4 And C4 II B7, Peugeot 207, 308, 301.
Practical and robust emergency tool kit tailored for Citroën and Peugeot drivers and workshops. This set contains a scissor jack, wheel wrench, towing eye and a dedicated holder that mounts to the vehicle body for secure storage. Designed to fit a range of PSA/Stellantis small and compact models, the kit is a compact and reliable solution for changing a wheel at the roadside or for storing as original-equipment replacement in the boot.
Key Features
– Compact scissor jack suitable for standard passenger cars; stable base and screw-driven lift for controlled operation.
– Cross-type wheel wrench for safe loosening and tightening of wheel bolts during wheel change.
– Threaded towing eye compatible with front or rear towing points on the listed models.
– Body-mounted holder keeps tools secured in the boot to prevent rattling and corrosion from contact with the load area.
– Simple, durable construction intended for emergency use and occasional tyre changes.
Compatibility
Fits the following models (typical factory fitment or compatible as spare):
- Citroën C3 II
- Citroën C3 Picasso
- Citroën C4
- Citroën C4 II (B7)
- DS3
- DS4
- Peugeot 207
- Peugeot 301
- Peugeot 308
Technical Information
- Manufacturer: Stellantis / Original Equipment For Citroën And Peugeot
- Model: Jack And Tool Kit For Citroën/Peugeot Small And Compact Models
- Product Codes: 673695, 672594, 671739
- Additional Numbers: None Specified
How To Use And Replace
Typical location is in the boot under the floor panel or secured to the body with the original holder. Basic wheel-change steps for mechanics and DIYers:
- Park on a flat, stable surface, engage the handbrake and apply a wheel chock opposite the wheel to be lifted.
- Loosen wheel bolts slightly with the wheel wrench before lifting the vehicle.
- Position the jack under the manufacturer-specified jacking point (consult the vehicle handbook) and raise the vehicle until the wheel is clear of the ground.
- Remove wheel bolts and replace the wheel. Refit bolts by hand, lower the vehicle and then tighten bolts in a cross pattern to the manufacturer recommended torque using a torque wrench.
- Return tools to the holder and secure in the boot to prevent movement.
Installation Recommendations
– Regularly inspect the jack screw, threads and the towing eye for corrosion or damage and lubricate threads lightly to ensure smooth operation.
– Ensure the tool holder is firmly attached to the vehicle body to avoid rattles and to protect tools from moisture.
– Always use the correct jacking points indicated by the vehicle manufacturer and never work under a vehicle supported only by the jack; use axle stands for prolonged work.
– Replace any bent or excessively worn components immediately; damaged jacks or wrench arms reduce safety.
Why This Part Most Often Fails
Common reasons for failure or malfunction include:
- Corrosion Of The Jack Screw Or Towing Eye Threads Due To Moisture And Road Salt.
- Mechanical Wear From Frequent Use Or Overloading Beyond The Intended Capacity.
- Damaged Or Broken Holder Due To Improper Stowage Or Impact In The Boot.
- Seized Or Stripped Threads When Tools Are Not Maintained Properly.
This toolkit is a practical spare-part replacement for technicians and competent DIYers who want a reliable, compact solution for emergency tyre changes and towing access on Citroën and Peugeot small cars. Product codes are often used when searching for the exact replacement, so check the listed codes if you are matching parts.
