Description
Electric central locking actuator for the left front door for PEUGEOT 206 with oval connector. Suitable for 3-door and 5-door models.
Product Overview
This left front door electric central locking actuator is a direct-fit replacement for the Peugeot 206. Designed with the oval 9135H3 connector, it operates the central locking mechanism to lock and unlock the door via the vehicle’s remote or central locking system. Ideal for professional workshops and experienced DIYers, this actuator restores reliable door locking, reduces interior noise from a failing motor and ensures proper door latch engagement.
Technical Information
- Manufacturer: Peugeot (Stellantis)
- Model: Peugeot 206
- Product Codes: 9135H3
- Other Numbers: NFP (as marked)
Installation Recommendations
- Disconnect the battery before starting work to avoid short circuits and prevent accidental airbag deployment.
- Remove the inner door trim carefully. Start by removing screws and plastic clips, then lift the panel away to access the door internals. Take care around the speaker and wiring harnesses.
- Locate the actuator mounted on the door lock assembly. Support the door glass and mechanism if required.
- Unclip the oval 9135H3 electrical connector. Inspect the connector for corrosion or damaged pins and clean if necessary.
- Detach linkage rods from the actuator using suitable pliers or clips, noting their routing and orientation for reassembly.
- Remove the fasteners securing the actuator, replace the unit, and reconnect linkage rods and the electrical connector.
- Reconnect the battery and test locking and unlocking function before refitting the door trim. Verify remote operation, manual lock, and central locking feedback.
- Reassemble the door trim, ensuring all clips and screws are secure and that door seals are seated correctly.
Most Common Failure Reasons
- Wear Of Internal Motor And Plastic Gears: Over time the small DC motor and plastic gear train inside the actuator can wear or strip, causing intermittent or complete failure.
- Water Ingress And Corrosion: Door seals or drainage issues allow moisture into the lock area, corroding contacts or jamming mechanical parts.
- Damaged Connector Or Wiring: Corrosion or broken wires at the oval 9135H3 connector will prevent power or signals reaching the actuator.
- Linkage Fatigue Or Detachment: Rods and clips that transfer motion from the actuator to the latch can bend, break or disconnect.
- Mechanical Stress From Forced Operation: Manual forcing of locks or misuse can damage the actuator mechanism or latch components.
Notes: Many customers search by the product code 9135H3. When replacing the actuator, check surrounding latch components and door seals to reduce the chance of repeat failures. Test the unit before final assembly to confirm correct operation.
