Description
Seat airbag for Citroën C2 C3 vehicles Driver’s seat Color HLT – Arthurien Blue (Artušovská)
Product Description
High-quality seat airbag designed for the driver’s seat of Citroën C2 and Citroën C3 (first generation). This airbag is intended as a direct replacement part for vehicles using part references 96462517LT and 8216Q6 and is optimized for technicians and experienced DIYers searching by part number. The unit protects the occupant in a side-impact event by rapidly deploying to reduce thoracic and abdominal injuries. Ideal for restorations after deployment or for replacing damaged modules following water ingress, connector corrosion, or electrical faults.
Compatibility And Fitment
Designed to fit Left Side (Driver’s Seat) configurations on Citroën C2 and Citroën C3 (first generation). Always verify visible connector type, mounting points and cloth/leather trim pattern against the vehicle before installation. Many customers locate this part using the product codes 96462517LT or 8216Q6.
How To Replace
- Disconnect Battery: Always disconnect the negative battery terminal and wait at least 10–15 minutes to allow the SRS capacitors to discharge.
- Remove Seat Trim And Bolts: Remove seat trim panels carefully to access the airbag module. Unbolt the airbag from the seat frame following vehicle manufacturer torque and removal procedures.
- Disconnect Connectors: Carefully unplug the SRS connector(s). Do not cut or damage wiring; inspect connectors for corrosion or melted insulation.
- Install New Module: Position the replacement airbag, fasten mounting bolts to the correct torque and reconnect the SRS connector securely.
- Reassemble And Test: Refit trim, reconnect the battery and use an approved diagnostic tool to clear SRS fault codes and perform system checks. Confirm SRS warning lamp behavior and diagnostic status before returning the vehicle to service.
Recommended Installation
- Work Should Be Performed By A Qualified Technician Or Experienced DIYer Familiar With SRS Systems.
- Always Disconnect The Battery And Observe Manufacturer Safety Intervals To Avoid Unintended Deployment.
- Handle The Airbag Module By Its Housing Only. Do Not Expose The Inflator To Heat Or Open Flames.
- Inspect Seat Frame, Wiring Harness And Connectors For Damage Or Corrosion Before Installation.
- After Installation, Use A Compatible Diagnostic Tool To Verify No SRS Faults Remain.
Why The Part Fails Most Often
Common causes of seat airbag failure include prior deployment in a collision, Water Ingress Or Moisture Causing Connector Corrosion, Electrical Faults Or Short Circuits In The Seat Wiring, Physical Damage From Improper Removal Or Seat Repair, And Deterioration Of Connectors Over Time. Faulty connectors or damaged harnesses often generate SRS fault codes even if the airbag module itself appears intact.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C2; Citroën C3 (First Generation)
- Product Codes: 96462517LT; 8216Q6
- Other Numbers: No additional reference numbers provided
Notes For Professional Use
Search Engines And Professional Buyers Often Locate This Part By The Product Codes Listed Above. When Replacing An Airbag, Also Inspect Related SRS Components Such As Seat Belt Pretensioners, Wiring Harnesses And Seat Occupancy Sensors To Ensure Complete System Integrity.
