Description
Electric window motor for the right rear window for PEUGEOT 407. Door behind the front passenger.
This electric window motor is a direct-fit solution designed for the right rear door of the Peugeot 407. Ideal for professional workshops and experienced DIYers, the unit restores reliable up-and-down movement of the glass and eliminates intermittent operation, grinding noises or a completely immobile window. The motor is commonly referenced by OEM numbers and is frequently searched by part number, so check the product codes below to confirm fitment with your parts list.
Key Benefits
Robust construction for long-term use, straightforward replacement procedure for trained technicians, and compatible with standard Peugeot 407 door regulator assemblies. Replacing a worn motor improves convenience, security and prevents water ingress issues caused by stuck windows.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 407
- Product Codes: 9646595580, 922492
- Other Numbers: NFP
Recommended Installation
- Disconnect The Battery Before Starting Work To Avoid Short Circuits And Unwanted Airbag Deployment.
- Remove Inner Door Trim Carefully To Preserve Clips And Fasteners.
- Support The Glass In The Raised Position Or Remove It From The Regulator For Easier Access.
- Disconnect Electrical Connector And Unbolt The Motor From The Regulator Assembly.
- Fit The New Motor, Reconnect The Connector And Test Window Operation Before Reassembling The Door Trim.
- Lubricate Sliding Tracks And Check Regulator Condition; Replace Regulator If Excessive Wear Or Bent Components Are Found.
How To Replace
- Remove Door Panel: Pry Off Trim Carefully, Unscrew Fixings And Detach Any Electrical Connectors.
- Detach The Glass From The Regulator Or Secure It In Place With Tape.
- Unbolt The Motor From The Regulator And Disconnect The Wiring Plug.
- Install The New Motor In Reverse Order: Bolt Motor To Regulator, Connect Wiring And Manually Cycle The Window To Ensure Smooth Movement.
- Reassemble Door Panel And Test Full Functionality Including Auto-Stop/Anti-Pinch If Equipped.
Why This Part Most Often Fails
Window motors typically fail due to a combination of wear and environmental exposure. Common causes include worn brushes or commutator, gear wear inside the motor assembly, water ingress and corrosion, or excessive load from a sticking regulator or damaged glass channel. Heavy use over many years, dirt accumulation in the tracks, or a weakened electrical connection can accelerate failure.
Notes For Selection
This motor is intended for Peugeot 407 rear right applications. Many technicians and owners search by the OEM numbers 9646595580 and 922492 when ordering, so verify your parts list or existing part number matches before purchase. If the regulator shows significant play or bent arms, replace the regulator assembly along with the motor to avoid premature failure of the new motor.
Final Tips
- Test The New Motor And Window Operation Before Refitting The Door Trim To Ensure Correct Alignment.
- Keep Door Seals And Drain Holes Clear To Reduce Risk Of Water Damage To The Motor.
- Use Correct Torque On Fasteners And Protect Plastic Clips During Disassembly To Maintain Door Panel Fitment.
