Description
Right rear window control motor reducer for PEUGEOT 308 T7 cars
Door behind the passenger
Part description
The used rear right window winder motor is intended for Peugeot 308 T7 cars. It is an electric window control motor-reducer, which ensures smooth movement of the glass when it is pulled in and out. Thanks to the given codes, the part is easy to find when searching for a spare car part by number.
This auto part is a suitable choice for repairing a non-functioning or stuttering window mechanism when the original motor has stopped working properly. For auto mechanics and home repairs, it is important to compare the part number, connectors and design with the old piece before assembly.
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 308 T7
- Other numbers: 0130822448
Product codes
- Product codes: 9680617480, 9675466680, 9224F0, 0130822448
- Models from labels and documents: Peugeot 308
Installation recommendations
Generally and typically for this type of part, the exact replacement procedure may vary depending on the specific car design and door construction. Always compare the used part with the original before assembly.
1) Before assembly
- Check that all product numbers and markings on the part match.
- Compare the connector, attachment and overall design of the motorcycle with the old part.
- Inspect whether the motorcycle cover, connector or mounting points are damaged.
- Check that the mechanical part of the window winder is not rusted, blocked or excessively worn.
2) Necessary tools and materials
- Basic set of screwdrivers and common hand tools
- Tools for removing interior trim
- Contact cleaner
- A cloth or a soft brush for cleaning around the assembly
- Protective gloves and suitable lighting
3) Step-by-step assembly procedure
- Turn off the ignition and disconnect the battery for safety reasons.
- Dismantle the door trim and carefully release access to the window mechanism.
- Check the wiring and condition of the electrical connector.
- Disconnect the connector of the original window winder motor.
- Unfasten the old gearmotor and carefully remove it.
- Compare the old and new part side by side, especially the fit, shape and connector.
- If the mechanism is dirty, clean the area around the mounting area.
- Place the used gearmotor in the correct place and fix it in the same way as the original part.
- Connect the electrical connector and check that the connection is tight and free of play.
- Before fully folding the door, verify the basic function of the window movement.
- If the window is working properly, put back the dismantled parts of the door.
- After assembly is complete, double-check the proper seating of the fillers and wiring.
-
4) Post-assembly checks and test drive/function verification
- Try pulling and pulling the window repeatedly.
- Observe that the operation is smooth, without unusual noises, jerking or stuttering.
- Check that the wiring does not touch moving parts anywhere when the mechanism moves.
- After reassembling the door, check the control function again.
5) The most common assembly mistakes + how to avoid them
- Part replacement by appearance instead of numbers – always compare markings and design.
- Leaving a damaged connector – check the cleanliness and condition of the contacts before assembly.
- Mounting in a damaged puller mechanism – if the mechanical part is also defective, replacing the motor alone may not solve the problem.
- Premature folding of the door without a test – verify the function of the window before the assembly is fully completed.
- Careless disassembly of inlays – use appropriate tools to avoid damage to trim or mounts.
Reasons why the part is damaged
- normal wear and tear of the electric motor and transmission part
- excessive load when jamming the window mechanism
- moisture in the door and subsequent corrosion of contacts or internal parts
- cabling damage or transition resistances in the connector
- repeated use with frozen or poorly guided glass
