Description
Electric central locking actuator for the left front door for Peugeot 308 vehicles.
This left front door electric lock/actuator is an OEM-compatible unit commonly found on Peugeot 308 models. Designed for professional workshops and experienced DIY mechanics, it restores reliable central locking, door latching and remote locking functions. Search keywords: Peugeot 308 door lock actuator, left front door lock, central locking actuator, part number 567148, 9135CN, 9800616680, Stellantis.
Overview
The actuator operates the latch mechanism inside the left front door, receiving signals from the central locking system and translating them into mechanical movement to lock or unlock the door. It is suitable for vehicles equipped with electric central locking and is frequently replaced when the door no longer locks or unlocks reliably, when the latch fails to engage, or when unusual noises are heard during operation.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Peugeot 308 (Left Front Door)
- Product Codes: 567148, 9135CN
- Additional Numbers: 9800616680
Compatibility
Fits Peugeot 308 vehicles equipped with electric central locking on the left front door. Verify the part number stamped on the original unit (567148 / 9135CN / 9800616680) to confirm correct match.
Function
The actuator converts electrical signals from the central locking system into mechanical action to move the latch and lock or unlock the door. It also provides the mechanical engagement required for door security and interfaces with the vehicle’s central locking wiring harness and door latch assembly.
Common Failure Causes
- Wear of internal plastic gears or motor brushes after prolonged use.
- Ingress of water or dirt into the mechanism causing corrosion or blockage.
- Broken linkage, detached clips or misaligned latch mechanisms preventing proper movement.
- Intermittent electrical faults or connector corrosion resulting in loss of power to the actuator.
Installation Recommendation
Recommended for professional mechanics or experienced DIYers. Typical replacement steps:
- Disconnect the negative battery terminal before starting to avoid short circuits and to protect vehicle electronics and airbag systems.
- Remove the door trim panel and vapor barrier carefully to access the latch assembly.
- Disconnect the electrical connector and any linkages or rods attached to the actuator.
- Remove retaining screws or clips and extract the old actuator from the latch housing.
- Install the new actuator, reattach linkages and connectors, and secure with the original fasteners.
- Reconnect the battery and test door locking/unlocking from the remote, key and interior switch. Cycle the lock several times to ensure smooth operation and check for unusual noises.
Suggested tools: trim removal tools, Torx/Phillips/metric sockets as required, electrical contact cleaner and light grease for moving parts. Lubricate latch pivot points lightly after installation.
Replacement Advice
Inspect the door sealing and drain channels for signs of water entry if the actuator failed due to moisture. If linkages are bent or clips are damaged, replace them to prevent premature failure. When diagnosing, rule out wiring or fuse issues before replacing the actuator.
Order by product code (567148 / 9135CN / 9800616680) to ensure you receive the correct left front door lock actuator for Peugeot 308 models.
