Description
Right passenger airbag for instrument panel Toyota Aygo 2005–2013.
Overview
This passenger airbag module is a direct-fit replacement for Toyota Aygo models built between 2005 and 2013. It is also compatible with the platform siblings Citroën C1 and Peugeot 107 where the same airbag assemblies are used. Often searched by part numbers (e.g. 8216JW, 5BDAGF07171415), this unit restores occupant protection for the front passenger side and is intended for installation by professional mechanics or experienced DIYers familiar with SRS systems.
Technical Information
- Manufacturer: Toyota / Stellantis (Citroën, Peugeot)
- Model: Passenger Airbag Module (Right Side) – Instrument Panel
- Product Codes: 8216JW
- Other Numbers: 5BDAGF07171415
Function
The passenger airbag module contains the gas generator (inflator) and cushion that deploy during a qualifying frontal or offset collision to reduce the risk of injury to the front-seat passenger. It works as part of the vehicle’s Supplemental Restraint System (SRS), triggered by crash sensors and controlled by the airbag control unit.
Compatibility
Fits: Toyota Aygo (2005–2013). Compatible/Equivalent On Platform: Citroën C1, Peugeot 107 (same platform variants). Always verify the part number when ordering — many technicians search by OE code 8216JW or 5BDAGF07171415.
Installation Recommendation
- Before Starting: Always disconnect the vehicle battery and wait for the SRS system capacitors to discharge. Follow the vehicle manufacturer’s specified waiting time (minimum wait commonly cited is 2 minutes; consult the repair manual for the exact procedure).
- Removal/Installation: Remove trim panels and instrument panel fasteners with care to avoid damaging clips. Unbolt the airbag module from the dash, disconnect electrical connectors with restraint system connectors handled carefully (do not pull on wiring). Fit the new module in the correct orientation and torque mounting bolts to manufacturer specifications.
- Post-Installation: Reconnect the battery and clear SRS fault codes using a suitable diagnostic tool. Confirm that the SRS warning lamp operates correctly (lamp on during key-on self-test and then off). If the airbag indicator remains illuminated, further diagnosis with proper diagnostic equipment is required.
- Safety Note: Use appropriate personal protective equipment and follow safety procedures when working on airbag systems. If uncertain, have the replacement performed by a qualified technician.
Why The Part Most Commonly Fails
- Crash Deployment: The most frequent reason for replacement is deployment during a collision — once deployed the module must be replaced.
- Physical Damage: Damage to the dashboard, impacts, or improper removal during repairs can harm the module or connectors.
- Electrical Or Connector Issues: Corrosion, bent pins, or wiring faults in the SRS connectors can cause the airbag to be disabled and the warning light to illuminate.
- Environmental Damage: Water ingress or severe moisture exposure can compromise connectors and wiring, leading to malfunction.
Ordering And Notes
Search By Part Number To Ensure Rapid Match: 8216JW, 5BDAGF07171415. This listing targets professional mechanics and competent DIYers who require a correct-fit passenger airbag module for Toyota Aygo / Citroën C1 / Peugeot 107 vehicles from 2005–2013.
