Description
Left rear window regulator mechanism for first-series 5-door CITROEN C4 vehicles
Door behind the driver
Part description
Used left rear window regulator mechanism for the first-series 5-door Citroën C4 guides and moves the glass in the door behind the driver. It is a suitable solution when replacing a damaged window regulator, for example if the window moves irregularly, sticks, or does not stay in position. Before replacing it, it is important to distinguish a mechanical fault from a problem with the controls or electric drive.
When selecting a part, compare in particular the numbers 9647444380, 922390 and 9223G9, the mechanism design, and its mounting points with the original part. The information provided does not state whether the motor is included, so its presence cannot be assumed.
Technical information
- Manufacturer: not specified; the information provided lists the designation Stellantis CITROEN PEUGEOT.
- Model: Citroën C4.
- Vehicle body style: 5 doors, first series.
- Location: left rear door, behind the driver.
- Part type: window regulator mechanism.
- Condition: used part.
- Additional numbers: 9223G9.
- Motor and other accessories included: not specified.
Product codes
- Product codes: 9647444380, 922390, 9223G9.
The product numbers make it easier to identify the correct window regulator version. When choosing, also consider the specified left rear position and 5-door body style for the model listed.
Installation recommendations
The following general procedure applies to this type of part. The exact removal procedure for the door panel, the method of securing the glass, and the mechanism mounting depend on the specific vehicle configuration. Follow the manufacturer’s service procedure.
1) Before installation
- Compare the markings, mechanism shape, mounting points, and glass attachments with the old part. If electrical components are present, compare their connections as well.
- Inspect the used part for deformation, corrosion, cracks, and damaged attachments. For cable-operated versions, also inspect the cables, their routing, and the pulleys.
- Check the condition of the glass guides and seals. Glass that sticks can overload even a properly functioning mechanism.
- Prepare a safe way to secure the glass. Once released from the regulator, the glass must not be allowed to fall freely into the door.
2) Required tools and materials
- Standard hand tools suitable for the fasteners used.
- A plastic trim removal tool for carefully removing the door panel.
- Suitable tools for securing the glass, protective gloves, and protection for painted surfaces.
- Cleaning products suitable for the surfaces involved and, if necessary, materials for restoring the seal of the door protective film.
- If non-removable fasteners are used, tools and suitable fastening materials as specified in the service procedure.
3) Step-by-step installation procedure
- Secure the vehicle against movement, switch off the ignition, and prepare a clean work area.
- If the controls are operational, position the glass to allow access to its mounting points, following the service procedure. Do not force a malfunctioning mechanism.
- Before disconnecting electrical components, disconnect the battery as specified by the vehicle manufacturer.
- Carefully remove the door panel. Release the relevant fasteners and any connectors without pulling on the wires.
- Carefully peel back the protective film or inner cover, if present. Try to preserve their sealing surfaces.
- Secure the glass to prevent it from falling, release it from the mechanism, and safely support or fasten it as specified in the service procedure.
- Release the original window regulator’s mounting points and remove it without damaging the wiring, glass, or inner parts of the door.
- Compare the two mechanisms side by side. Transfer a separate drive only if the design and service procedure allow it.
- Insert the replacement mechanism and secure it at the specified points. Ensure it is correctly seated without twisting and that the moving parts have a clear path.
- Position and secure the glass. Check that it sits correctly in the guide and that its attachments are not under lateral strain.
- Reconnect the disconnected electrical components and restore power according to the manufacturer’s instructions. After removing the temporary glass support, carefully check operation; keep hands and tools away from moving parts.
- After a successful function test, restore the seal of the protective film or cover and reinstall the door panel. If required for the specific configuration, initialize the window controls according to the manufacturer’s instructions.
4) Post-installation checks and function testing
- Carefully raise and lower the window several times. It should move smoothly, without tilting, sticking, or making unusual noise.
- Check that the glass seats correctly in the seals and that the installed door panel is secure.
- Check the operation of the relevant controls and any additional functions, depending on the vehicle’s actual equipment.
- During a short test drive with the window closed, listen for any rattling or increased wind noise. If there is a problem, recheck the position of the glass and mechanism.
5) Common installation mistakes and how to avoid them
- Glass not secured adequately: always support or secure it safely before releasing its attachments.
- Mechanism not seated correctly: check the position of all mounting points and the glass guide before tightening.
- Guide or seal fault left unresolved: remove the cause of increased resistance to avoid unnecessarily overloading the replacement part.
- Pinched wiring or incorrectly routed cable: before testing, check that nothing obstructs the mechanism’s path.
- Protective film not sealed: carefully restore its seal to prevent water from reaching the door panel and the interior.
Reasons why the part may be damaged
Window regulator mechanisms generally become damaged, particularly through wear and increased resistance as the glass moves. The following causes do not describe the condition of the item offered:
- Wear of moving parts and attachments due to prolonged use.
- Damage to cables or pulleys in cable-operated mechanisms, such as frayed cables or broken guides.
- Dirty or deformed glass guides, which increase the load on the window regulator.
- Attempting to open a frozen window or operating it when something else is obstructing its movement.
- Moisture and corrosion, which can restrict movement and weaken individual components.
- Incorrect previous installation or damage to the door, which can cause the glass to move outside its proper path.








