Description
SERVO MOTOR FDK Heating for Citroën C-Crosser and Peugeot 4007
FDK heating servomotors for Citroën C -Crosser and Peugeot 4007 is an original used part that controls the flaps in the heating unit/air conditioning (HVAC). It ensures accurate mixing of warm and cold air and/or redirection of flow (legs, glass, center exhalation). Thanks to the proper actual actuator, the temperature control and air distribution are fast and quiet.
Typical symptoms of defect include temperature fluctuations, inaccurate settings, clicking from the dashboard, or the valve in one position. These models are due to the wear of the gears or the position sensor failure in the servomotor. Replacement is usually the fastest and most reliable solution.
Assembly is usually accessible from the passenger compartment at the heating body behind the compartment. Procedure: Disconnect the battery, access the actuator, disconnect the electric connector, enable the fastening screws (often Torx), replace the part and settle firmly again. After assembly, we recommend switching on the ignition and allow the air conditioning to be automatic initialization; Some cars can be calibrated by diagnostics. Before ordering, check the match according to the part number and shape of the connector (number of pins), especially with respect to the equipment of the car (manual/automatic air conditioning).
technical information
- Manufacturer: FDK
- Model: Citroën C -Crosser (2007–2012), Peugeot 4007 (2007–2012)
- Product codes: VHB30-30005-A, 647902
- Other numbers: 6479.02, 6479 02
The advantage of the original FDK servomotor is the right communication with the control unit of the air conditioning and the precise filling of the flaps without additional modifications. If you are looking for a replacement according to code 647902 (often mentioned as 6479.02) or VHB30-30005-A, this part is designed for the Citroën C-Crosser / Peugeot 4007.
