Description
Antenna base with mast for Peugeot 207 vehicles.
High-quality replacement antenna base with mast designed for Peugeot 207. Ideal for professional workshops and DIY mechanics looking for a direct-fit spare part. This unit restores reliable radio reception and replaces worn, corroded or broken antenna assemblies. Commonly searched by part numbers 9674768780, 6587H9 and 6587J0 — include these codes in your search to find the correct fit fast.
Technical Information
- Manufacturer: Stellantis (Peugeot / Citroën Group)
- Model: Peugeot 207
- Product Codes: 9674768780
- Additional Numbers: 6587H9, 6587J0
Fitment
Designed to fit Peugeot 207 vehicles. Always match the part number (9674768780 / 6587H9 / 6587J0) with the original unit to ensure correct compatibility and mounting configuration.
Function
The antenna base with mast provides reception for the vehicle radio by coupling incoming AM/FM signals through the mast into the vehicle coaxial feed. The base secures the mast to the roof or roofline and provides the electrical feed and environmental seal to prevent moisture ingress.
Common Failure Reasons
- Corrosion at the mast or base due to prolonged exposure to weather, salt and moisture.
- Mechanical damage to the mast from car washes, low branches or impacts.
- Water ingress causing deterioration of seals or corrosion of contacts and coaxial cable.
- Broken or degraded internal coaxial cable or connector, resulting in poor or intermittent reception.
How To Replace
Replacement is straightforward for experienced mechanics and competent DIYers. Typical steps:
- Remove interior trim or headliner access panel to reach the antenna nut (if roof-mounted).
- Unscrew and remove the mast from the base.
- Disconnect the coaxial cable connector from the antenna base.
- Unscrew or unclip the antenna base retaining nut/fasteners and lift the base away from the roof.
- Clean the mounting surface, remove old sealant, and fit a new gasket or sealant to ensure watertight installation.
- Feed the coaxial cable through, connect the new base, secure fasteners and torque to manufacturer specification where available.
- Reinstall interior trim/headliner and test radio reception across bands to confirm correct installation.
Recommended Tools And Tips
- Trim removal tools, socket set or spanner for retaining nut, and a flat screwdriver.
- Clean the sealing surface thoroughly and replace any degraded gaskets or sealant to prevent leaks.
- When routing or reconnecting the coaxial cable, avoid kinks and sharp bends to preserve signal quality.
- Verify reception after installation and check for water tightness after the first wash or rain.
Installation Recommendation
Fitting is recommended to be performed by a trained technician or an experienced DIYer familiar with roof trim removal and sealing procedures. Use new sealing material when installing to maintain the vehicle’s watertight integrity. Note the part numbers (9674768780 / 6587H9 / 6587J0) when ordering to ensure an exact replacement.
Why The Part Typically Fails
Most failures result from long-term exposure to the elements (corrosion and seal deterioration) or from physical damage to the mast. Water entering the base accelerates contact corrosion and can damage the coaxial cable, producing intermittent or lost reception. Replacing the entire base and installing proper sealing prevents repeat failures.
