Description
Driver Seat Airbag for PEUGEOT 206. Cable May Not Be Included. Color HZR – Grey Astrakhan
High‑value replacement part for mechanics and experienced DIY enthusiasts: a driver seat airbag intended for Peugeot 206 vehicles. This unit carries the common OEM references (96498618ZR, 8216P2, NFP) and is suitable where a seat‑mounted driver airbag is required. The product is supplied without guarantee of the seat wiring harness being included, so check for the presence of the connector and cable before installation. Keywords for quick search: Peugeot 206 driver seat airbag, 96498618ZR, 8216P2, seat airbag.
Product Overview
The driver seat airbag is designed to deploy in side or frontal impacts (depending on vehicle design and restraint strategy) to help protect the occupant’s torso and pelvis area. For Peugeot 206 owners and repair shops this airbag is a common replacement after an accident or when the original unit is damaged during seat repairs. The visible color code is HZR – Grey Astrakhan, matching many Peugeot interior trims.
Compatibility
Fits: Peugeot 206 models (standard seat configurations). Always verify fitment by part number: 96498618ZR / 8216P2.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 206
- Product Codes: 96498618ZR, 8216P2
- Other Numbers: NFP
Function
The seat airbag contains a pyrotechnic inflator and squib circuit that triggers rapid inflation during an impact to reduce forward and lateral movement of the occupant. It works together with seatbelts and other restraint components to reduce injury risk. The electrical connection and squib resistance must be correct for proper system operation and for the airbag warning light to reset.
Installation Recommendations
- Disconnect the vehicle battery before starting work and wait at least 10 minutes to allow system capacitors to discharge.
- Follow the vehicle manufacturer’s removal and installation steps for seats and airbag modules to avoid damage to the inflator or connectors.
- Handle the module with the airbag face pointing away from you; do not expose to heat, sparks or static discharge.
- If the original wiring harness or connector is missing, obtain the correct mating connector and check continuity/squib resistance according to factory specifications before installation.
- After fitting, reconnect the battery and verify that the airbag indicator on the dashboard behaves according to manufacturer procedure (brief on‑check then off). If the light remains on, perform diagnostic fault reading with appropriate PSA diagnostic equipment.
Why This Part Fails Most Often
- Deployment In A Collision: The most common cause is activation during an accident — deployed airbags must be replaced.
- Connector Or Cable Damage: Cut, corroded or missing wiring between seat and vehicle harness prevents proper operation or causes faults.
- Physical Damage During Repairs Or Removal: Mishandling when removing seats or upholstery can damage the inflator or squib.
- Water Ingress And Corrosion: Moisture reaching connectors or contacts may cause electrical faults or intermittent operation.
- Age And Storage Damage: Prolonged storage in unsuitable conditions (extreme heat, humidity) or mechanical stress can degrade components.
