Right rear window mechanism Citroën C4 5-door 9647444280 922489

€36.00

Stellantis CITROEN PEUGEOT
9647444280 922489 9224H3

1 in stock

SKU: 9959-A8_K26 Categories: , ,

Description

Right rear window regulator mechanism for first-series 5-door CITROËN C4 vehicles
Passenger-side rear door

Part description

Used right rear window regulator mechanism for the first-series 5-door Citroën C4 guides and moves the glass in the passenger-side rear door. It is a suitable choice when repairing a non-functioning or mechanically damaged window regulator, provided the fault is actually in the mechanism.

When selecting a part, compare in particular the product numbers 9647444280, 922489 and 9224H3, the mechanism design and its mounting points with the original part. The available information does not specify whether an electric motor is included; therefore, the scope of the assembly cannot be inferred from the window regulator designation alone.

Technical information

  • Manufacturer: not specified; the information provided lists the designation Stellantis CITROEN PEUGEOT.
  • Model: Citroën C4.
  • Vehicle version: first series, 5 doors.
  • Location: right rear door, behind the passenger.
  • Part type: window regulator mechanism.
  • Condition: used auto part.
  • Additional numbers: 9224H3.
  • Electric motor included: not specified.

Product codes

  • Product codes: 9647444280, 922489, 9224H3.

The numbers are an important reference when looking for a replacement mechanism. Before installation, also compare the door side, design and mounting points of the original and replacement parts.

Installation recommendations

The following procedure is general and typical for replacing a window regulator mechanism. The exact method for removing the door trim, releasing the glass and securing the mechanism depends on the specific vehicle version. Follow the manufacturer’s service procedure.

1) Before installation

  • First identify the cause of the fault. A non-functioning window does not necessarily mean the mechanism is damaged; the problem may also be in the controls, power supply or electric motor.
  • Compare the part markings, assembly shape, mounting points and method of securing the glass. If the assembly includes electrical components, compare their connections as well.
  • Check the used part for deformation, cracks, corrosion and the condition of moving parts. For cable-type mechanisms, check the cables, their routing and how they are seated.
  • Prepare a safe means of securing the glass against falling. Do not dismantle the mechanism or operate it loose outside the door without support and without following the procedure specified by the manufacturer.

2) Required tools and materials

  • Standard hand tools suitable for the fasteners used, and tools for carefully releasing the trim.
  • Equipment intended to safely hold and secure the glass.
  • Protective gloves, safety glasses, and suitable protection for the paintwork and interior.
  • Cleaning supplies and, if necessary, material for restoring the seal of the inner protective film, depending on the door design.
  • If riveted joints are used, suitable equipment for removing and replacing them in accordance with the service procedure.

3) Step-by-step installation procedure

  1. Park the vehicle safely and ensure there is enough working space by the right rear door.
  2. If possible and safe, position the glass so that its mounting points are accessible. If the mechanism is jammed, do not use force.
  3. Switch off the ignition and, before working on electrical connections, disconnect the battery according to the vehicle manufacturer’s instructions.
  4. Carefully remove the door trim. Disconnect the relevant connectors and controls without pulling on the wires.
  5. Access the mechanism and carefully move aside any protective film or moisture barrier. Note the wiring route and the position of the mounting points.
  6. Support the glass securely, release its connection to the mechanism and secure it against slipping down, following the service procedure.
  7. Disconnect any electrical connection to the mechanism, release its fasteners and remove the old part without damaging the glass, wiring or door.
  8. Compare the two parts side by side. If the electric motor or other original components need to be transferred, proceed only according to the service instructions for the specific version.
  9. Insert the replacement mechanism and secure it at the appropriate mounting points. Ensure it is seated correctly without strain and that the moving parts can travel freely.
  10. Position and secure the glass. Check that it sits correctly in the guide, and remove the temporary support only after it is securely mounted.
  11. Reconnect the electrical connections and reconnect the battery according to the manufacturer’s procedure. During testing, keep hands and tools out of the path of the glass and mechanism; if the glass tilts or there is unusual resistance, stop movement immediately.
  12. After a successful test, restore the seal of the protective barrier, position the wiring correctly and reinstall the door trim.

4) Post-installation checks and function verification

  • Check several times that the window moves smoothly down and up. The glass must not tilt, bind or come loose from its mount.
  • Listen to the mechanism as it operates and check for cracking, scraping or knocking sounds.
  • Check that the glass closes correctly and that the relevant controls work. If the specific version requires window initialization, perform it according to the manufacturer’s instructions.
  • Check that the trim and moisture protection are properly seated. If you take a short test drive, use it to check for vibrations or unusual aerodynamic noise.

5) Common installation mistakes and how to avoid them

  • Glass not secured sufficiently: always support it securely and prevent it from falling before releasing the mechanism.
  • Installing the mechanism under strain: before final fastening, check that the assembly and glass are seated correctly in the guide.
  • Forcing the window or repeatedly operating it while jammed: stop if there is resistance and identify the cause; otherwise, further damage may occur.
  • Pinched wiring or incorrectly connected connectors: maintain the correct routing and check that the connections are secure.
  • Protective film not sealed: after the repair, restore its proper adhesion and seal to prevent water from reaching the trim.

Reasons why the part may become damaged

The following causes of damage may generally affect window regulator mechanisms; they do not describe the condition found on this particular part:

  • Wear of moving parts through prolonged use, including sliders and guides, as well as cables in cable-type mechanisms.
  • Increased resistance from the glass due to a dirty guide, damaged seal or incorrect seating.
  • Attempts to lower a frozen or blocked window, which place excessive strain on the mechanism.
  • Moisture and corrosion, especially when the protection inside the door is damaged or water drainage is restricted.
  • Impact to the door or an improper previous repair, which may deform or misalign the mounting points.
  • Continuing to use the window at the first signs of a fault, such as cracking noises, uneven movement or the glass tilting.

Additional information

Weight 2 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.