Description
Knee Airbag for Citroën C5 vehicles from 2005 to 2007. Color HZF – Narbona Grey.
Product Overview
High-quality replacement knee airbag designed for Citroën C5 models produced between 2005 and 2007. The knee airbag fits under the driver’s lower dashboard and is a critical component of the occupant restraint system, reducing knee and lower-leg injuries in a frontal impact. Commonly referenced by part numbers such as 96501412 and 8216EP, this unit is intended for professional fitment by mechanics or experienced DIYers familiar with SRS systems.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën C5 (2005–2007)
- Product Codes: 96501412, 96501412 00, 8216EP
- Additional Numbers: NFP
Fitment And Compatibility
This knee airbag is specified for Citroën C5 vehicles manufactured in the 2005–2007 period. Always compare the vehicle’s existing part number with the codes above to confirm compatibility. Fitment may vary by trim and market, so matching the OEM part number is the most reliable method.
Installation Recommendations
- Safety First: Always disconnect the negative battery terminal before starting work and wait at least 10 minutes to allow the SRS system capacitors to discharge.
- Remove Trim Carefully: Remove lower dashboard trim panels and fasteners to access the knee airbag module. Keep clips and screws organized for reassembly.
- Electrical Connector: Unplug the airbag connector using the correct release method—avoid pulling on wires. Inspect the connector for corrosion or damage.
- Mounting: Unbolt the old module, transfer any required brackets, and fit the replacement in the correct orientation. Tighten fasteners to the manufacturer’s torque specification where available.
- Post-Installation: Reconnect the battery, then use an appropriate diagnostic tool to read and clear SRS codes and to verify system integrity. If the airbag warning lamp remains on, follow diagnostic procedures to identify persistent faults.
Why This Part Typically Fails
- Deployment In A Collision: The most common reason for replacing a knee airbag is deployment during an accident.
- Water Ingress Or Corrosion: Moisture or corrosion at connectors can cause electrical faults or prevent deployment.
- Physical Damage: Damage from impacts, improper removal, or aging dashboard components can impair the module.
- Electrical Faults Or Connector Issues: Broken pins, damaged wiring, or poor contact can trigger SRS faults or disable the airbag.
Notes For Mechanics And DIYers
Work on SRS components requires care and respect for safety procedures. Use suitable personal protective equipment and follow workshop manual instructions. After fitting, verify the airbag circuit with diagnostic equipment and clear any stored fault codes. When replacing a deployed module, ensure associated sensors and seatbelt pretensioners are inspected and replaced if necessary.
