Description
Right Side Mirror Citroën C5 from 2005, can also be used on models up to 2005
Electrically Operated, Electrically Folding, Heated, Temperature Sensor
Passenger Side
Color EZW – Gray Paint
Lightly Scratched Paint
This complete right side mirror assembly is a direct-fit solution for Citroën C5 owners and professionals searching by part code (e.g. 8149WH / EZWD). Designed with electric adjustment, electric folding and an integrated heating element plus a temperature sensor, it restores full functionality after damage or wear. The unit is a full mirror assembly (housing, glass, motors and heater) and is suitable for workshop replacement or competent DIY repair. Slight paint scratches are cosmetic and do not affect mirror operation.
Features And Benefits
- Direct Replacement For Citroën C5 Passenger Side – OEM Compatibility Improves Fit And Finish.
- Electric Adjustment And Folding – Restores Remote Control Functions For Convenience And Safety.
- Integrated Heater And Temperature Sensor – Ensures Rapid Demisting And Reliable Performance In Cold Weather.
- Part Numbers Often Used In Searches – Easy To Find By Code (8149WH, EZWD).
- Complete Assembly – No Need To Transfer Motors Or Glass In Most Cases, Saving Time In The Workshop.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Citroën C5 (from 2005, may fit some earlier model years)
- Product Codes: 8149WH, EZWD
- Other Numbers: Color Code EZW – Gray Paint; Side: Passenger (Right)
Installation Recommendations
Replacement of the mirror assembly is a straightforward job for a trained technician or an experienced DIYer. Typical steps:
- Disconnect The Battery Before Work To Avoid Short Circuits And To Protect Electrical Components.
- Remove Inner Door Trim/Access Panel Carefully Using Trim Tools To Avoid Damaging Clips.
- Unplug The Mirror Electrical Connector And Remove Mounting Bolts Holding The Mirror To The Door.
- Fit The New Mirror, Tighten Fasteners To Manufacturer Torque Where Specified, Reconnect The Wiring And Refit Trim.
- Verify All Functions After Installation: Mirror Adjustment, Folding Mechanism, Heating And Any Integrated Sensors.
Why The Part Commonly Fails
- Mechanical Wear Of Folding Motor Or Gear – Repeated Folding And External Impacts Lead To Gear Wear Or Motor Failure.
- Corrosion And Water Ingress – Seals Or Connector Corrosion Can Cause Intermittent Or Total Loss Of Electrical Functions.
- Electrical Connector Damage Or Broken Wiring – Door Movement Causes Fatigue In Wiring Looms, Especially Near Hinges.
- Physical Impact Or Collision – Cracked Housing Or Glass From Minor Collisions Or Parking Incidents.
- Aging Heater Element Or Sensor Faults – Over Time Heating Efficiency Can Fall Or The Temperature Sensor May Fail.
Practical Notes For Mechanics And DIYers
Searches By Part Number Are Common: Use Codes 8149WH and EZWD To Locate Matching Units Quickly. When Replacing, Inspect Door Harness And Connector For Damage; Repairing The Loom Can Prevent Repeat Failures. Cosmetic Paint Scratches Do Not Compromise Functionality But Can Be Touched Up If Required.
Warranty And Quality
This listing describes the physical condition (including the noted light paint scratches). The assembly is supplied as a direct-fit replacement intended to restore mirror functionality and fit. For workshop installations, verify mechanical operation and electrical connections before completing reassembly.
