Description
Right Front Passenger Seatbelt For PEUGEOT 207
Color FXX – BLACK
Description
Right-hand pyrotechnic pretensioner seatbelt designed for the front passenger side of Peugeot 207 vehicles. This safety-critical assembly combines a webbing retractor with an integrated pyrotechnic pretensioner and latch to restrain and secure the occupant during a frontal impact. The unit is commonly identified by part numbers 96869044XX and 8975JY, which are often used in online searches and parts catalogs.
Technical Information
- Manufacturer: Peugeot (Stellantis)
- Model: Peugeot 207
- Product Codes: 96869044XX, 8975JY
- Additional Numbers: Color Code FXX (Black)
Function And Features
The seatbelt assembly performs two main safety functions: normal restraint and active pretensioning. During everyday use the retractor controls webbing extension and locks under sudden deceleration to prevent forward movement. In a crash the pyrotechnic pretensioner tightens the belt instantly to reduce occupant travel before airbag deployment. Webbing, latch, and retractor mechanisms are engineered to meet crash-energy management requirements for the vehicle.
Installation Recommendations
- Park the vehicle on a level surface and set the parking brake.
- Always disconnect the negative battery terminal and wait at least 10 minutes to allow SRS system capacitors to discharge before working on any components related to the restraint system.
- Remove interior trim panels and any seat or center console covers blocking access to the retractor, lower anchor, and upper guide as required.
- Unbolt the lower anchor(s) and the retractor. Use appropriate sockets and hand tools; do not use impact guns on airbag/pretensioner connectors. Retain or replace bolts per manufacturer’s guidance.
- Install the replacement unit with correct routing of the webbing. Tighten anchor bolts to the manufacturer’s torque specification — always follow Peugeot torque settings rather than guessing.
- Reconnect any electrical connectors for the pretensioner securely and inspect for corrosion or damage. After installation, check belt operation by extending and retracting the webbing and performing a locking test (sharp pull to verify emergency lock). If the SRS airbag/seatbelt warning light remains on, diagnostic equipment should be used.
- Dispose of any deployed pretensioner components according to local regulations; do not attempt to reuse fired devices.
Note: If you are not experienced with SRS circuits or pyrotechnic components, have the final installation and system checks performed by a qualified technician.
Why This Part Fails Most Often
- Deployment During A Collision: Pretensioners are single-use devices and must be replaced after activation.
- Webbing Damage: Cuts, fraying, chemical contamination, or excessive wear reduce effectiveness and require replacement.
- Retractor Failure: Internal mechanisms can seize or lose damping, preventing proper locking or retraction.
- Connector Corrosion Or Wiring Damage: Electrical faults can prevent pretensioner activation or trigger SRS warning lights.
- Improper Installation Or Loose Anchor Bolts: Incorrect torquing or damaged mounting points compromise performance.
Maintenance And Replacement Guidelines
There is no fixed service interval for seatbelts; inspect them regularly for visible damage, smooth retraction, and correct latching. Replace immediately after any crash where pretensioners or airbags have deployed, after visible damage, or if the belt fails locking or retraction tests. Use only compatible replacement parts identified by matching product codes or manufacturer specifications.
Compatibility And Search Tips
This right front passenger seatbelt is intended for Peugeot 207 models. Buyers commonly search using the product codes 96869044XX and 8975JY—include these numbers when looking up fitment or cross-references.
