Description
Right Rear Seat Belt For Citroën C3 (Rear Seat Behind Front Passenger)
This Right Rear Seat Belt for the Citroën C3 is a direct-fit safety component designed for the rear seating position behind the front passenger. Ideal for professional workshops and DIY mechanics, this part is commonly searched by part numbers such as 96408573XX and related codes, making it easy to find when replacing a worn or damaged belt. Installing a correct, fully functional rear seat belt restores occupant protection and legal compliance after wear, damage or an accident.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C3 (Right Rear, Passenger-Side Rear Seat)
- Product Codes: 96408573XX
- Additional Numbers: 8973TZ, 8975TZ, NFP
Function And Fitment
The seat belt secures the occupant in the right rear seating position and is an essential element of the vehicle’s passive safety system. It is intended to lock and restrain the passenger during sudden deceleration or impact. This assembly fits the Citroën C3 rear passenger-side seat and matches original mounting locations and anchorage points for proper alignment and function.
How To Replace
Replacement requires basic mechanical skills and common hand tools. General steps:
- Move and remove any interior trim panels and seat cushions obstructing access to the belt retractor and lower anchor.
- Unbolt the lower anchor and the retractor mounting bolts. Keep track of washers and spacers.
- Remove the old belt assembly and route the new belt correctly through trim guides and buckles as on the original.
- Torque mounting bolts to manufacturer specifications and verify that the belt retracts and locks smoothly.
- Reinstall trim and check for correct operation under several pull angles. Ensure no webbing is twisted or pinched.
Installation Recommendations
- Follow Vehicle Manufacturer Torque Specifications For Anchor Bolts.
- If The Vehicle Is Equipped With Pyrotechnic Pretensioners Or Airbag Systems, Disconnect The Battery And Observe Safety Waiting Times Before Work.
- Use The Correct Fasteners And Replace Any Corroded Anchors Or Damaged Hardware.
- Inspect Surrounding Trim And Seat Mounts For Damage Caused By A Previous Impact.
- After Installation, Test The Retractor And Buckle Function Under Different Angles To Confirm Proper Locking Behavior.
Common Failure Reasons
Typical causes for replacement include:
- Webbing Wear Or Fraying From Age, Sun Exposure Or Repeated Use.
- Retractor Jamming Or Failing To Lock Due To Dirt, Corrosion Or Internal Mechanism Fault.
- Buckle Malfunction Or Inability To Latch Securely.
- Damage From A Collision Which Compromises The Integrity Of The Belt Or Anchors.
- Corroded Mounting Points Or Fasteners That Reduce Holding Strength.
Regular visual inspection and prompt replacement of any belt showing signs of wear or functional fault is essential for continued occupant protection. Searching by part number (e.g., 96408573XX) will quickly locate compatible units for repair or replacement.
