Description
Front Passenger Seatbelt For PEUGEOT 308 T7
Pyrotechnic Retractor Holder
Color FXX – BLACK
High-quality front passenger seatbelt intended for Peugeot 308 (T7), featuring an integrated pyrotechnic retractor holder. Designed as a direct-fit safety component, this seatbelt restores occupant restraint function after wear or incident. Frequently searched under OEM codes 96569048XX and 8975K5, it is suitable for professional workshops and skilled DIY mechanics who require reliable replacement parts for airbag and restraint system repairs.
Function And Application
This is a 3-point front passenger seatbelt with an integrated pyrotechnic pretensioner built into the retractor. During a severe impact, the pyrotechnic element activates to instantly retract the webbing and reduce occupant movement, working together with the airbag system to lower injury risk. The retractor assembly secures to factory anchor points and connects to the vehicle restraint harness and SRS wiring where applicable.
Compatibility And Fitment
Designed For: Peugeot 308 (T7). The part is typically searched and identified by the OEM numbers listed below. Ensure physical fitment with the original mounting points and harness routing when replacing the unit.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Peugeot 308 (T7)
- Product Codes: 96569048XX, 8975K5
- Additional Numbers: Color Code FXX (Black)
Common Failure Modes And Why The Part Fails
Seatbelts and pretensioners most commonly fail or require replacement due to the following reasons: deployment during a collision (even minor deployments can compromise pretensioner integrity), internal wear of the webbing from prolonged use or abrasion, contamination (dirt, liquids, or corrosion of anchor hardware), and damage to the retractor mechanism preventing smooth locking or rewinding. Electrical faults or connector damage can also render a pyrotechnic pretensioner inoperative.
Replacement Interval And Inspection Points
There is no fixed service interval for seatbelts; inspection is advised after any incident, visible wear, contamination, or if the retractor does not lock or rewind properly. Replace the seatbelt if the pretensioner has been deployed, if the webbing shows cuts or fraying, or if the retractor mechanism is sticky or noisy. Always inspect mounting bolts, anchor points, and electrical connectors for corrosion or damage.
Installation Recommendations
- Disconnect Battery: Always disconnect the vehicle battery and follow the manufacturer’s recommended safety procedure before working on SRS-related components to avoid accidental deployment.
- Follow Workshop Manual: Remove interior trim as required to access the retractor and anchors. Unbolt the retractor from its mounting points and disconnect any electrical connector for the pretensioner if present.
- Fitment: Install the new seatbelt ensuring the webbing routes exactly as the original, tighten mounting bolts to the vehicle manufacturer’s torque specification, and reconnect any electrical connectors securely.
- Post-Fit Check: Verify smooth webbing travel, correct locking under quick pulls, and that no warning lights related to the restraint system remain. If a service light persists, diagnose with appropriate SRS diagnostic equipment.
- Professional Attention: For vehicles with SRS or airbag interactions, consider installation by a qualified technician if you are not experienced with restraint systems.
Why Choose This Seatbelt
This replacement seatbelt provides direct-fit compatibility with Peugeot 308 (T7) mounting points and carries the OEM identification codes that mechanics commonly use when ordering parts. It offers the safety function expected from an original-style pretensioner-equipped retractor and helps restore occupant protection after damage or wear.
