Description
Right front window motor for PEUGEOT 307
!!!! Not suitable for CC Cabrio model !!!!
Tested, fully functional
Front passenger door
This replacement right front electric window motor is designed for Peugeot 307 vehicles and is an ideal choice for mechanics and DIY enthusiasts looking to restore reliable window operation on the front passenger door. Supplied with the OEM-related numbers, the unit matches standard Peugeot electrical connectors and mounting points for straightforward installation on compatible 307 models. Common search terms include the OEM codes 9649911080, 9222CF and 9222S4, which improve findability in online stores and parts catalogs.
Key Features
– Direct-fit motor for right (front passenger) door window of Peugeot 307.
– OEM-related reference numbers: 9649911080 / 9222CF / 9222S4 for easy lookup.
– Designed to interface with existing regulator assemblies and factory connectors.
– Robust design suited to workshop repairs and home installations.
Compatibility And Notes
– Intended For: Peugeot 307 (right front passenger door electric window).
– Not Suitable For: Peugeot 307 CC Cabrio models. Please verify the part number before ordering if your vehicle is a convertible or has non-standard trim packages.
– Frequently Searched By Part Number: 9649911080, 9222CF, 9222S4.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 307 (Right Front / Passenger Door)
- Product Codes: 9649911080, 9222CF, 9222S4
- Additional Numbers: PSA OEM-related references (see Product Codes)
Installation Recommendations
Before starting, disconnect the vehicle battery to avoid short circuits and unintended regulator movement. Typical installation steps:
- Remove the door trim panel and any vapor barrier carefully to access the regulator and motor assembly.
- Support the glass in its up position (use tape or a helper) and unclip or detach the glass from the regulator if required.
- Disconnect the electrical connector and unbolt the motor from the regulator. On some assemblies the motor is integrated with the regulator and may require unbolting the whole regulator to replace the motor.
- Install the replacement motor, secure fasteners to OEM torque where specified, reconnect the electrical connector and temporarily reconnect the battery to test operation before reassembling the door trim.
- Check window travel and alignment; adjust regulator mounting or glass clamps if the window binds. Lubricate guide rails with suitable grease and ensure water seals are intact.
For mechanics: inspect the regulator cables, sliders and guide rails at the same time; replacing a worn regulator together with the motor avoids repeated labor. After installation, verify correct operation through full travel and auto-reverse (if equipped).
Why This Part Most Commonly Fails
- Brush And Commutator Wear: Over time the motor brushes wear, reducing torque and eventually preventing movement.
- Gear Or Pinion Damage: Plastic or metal gear teeth can strip under load, especially if the window has been forced or the regulator is seized.
- Water Ingress And Corrosion: Door moisture can enter the motor housing, corroding contacts or bearings and causing electrical failure.
- Regulator Binding Or Cable Fraying: Excessive friction in the guide rails or a frayed cable increases load on the motor and shortens life.
- Electrical Issues Upstream: Faulty switches, connectors, fuses or wiring may give the impression of motor failure; always confirm voltage at the motor connector before replacement.
Practical Tips
- When replacing the motor, test the old unit for signs of water damage or mechanical wear so you can decide whether to service or replace the regulator as well.
- Keep door sealing and drainage channels clear to reduce risk of future water ingress.
- If window movement is slow but motor runs, inspect the regulator and lubricate guides—this can avoid unnecessary motor replacement.
This part is aimed at professionals and competent DIYers. Use appropriate tools and follow safety procedures. Ordering by the part numbers listed above will improve the chance of quick compatibility match for Peugeot 307 passenger-side electric windows.
