Description
Wiring harness for passenger seat for Peugeot 207 first series.
High-quality used wiring harness designed for the passenger seat of the Peugeot 207 (first series). Supplied under code 6545GC, this harness restores electrical connectivity for seat functions and safety circuits, helping professional mechanics and DIY enthusiasts quickly return the vehicle to service. Ideal when the original wiring is damaged by wear, corrosion, or accident repair, this harness is a direct-fit replacement that speeds up installation and reduces downtime. Common search term: 6545GC passenger seat harness Peugeot 207.
Technical Information
- Manufacturer: Peugeot / Stellantis
- Model: Peugeot 207 (First Series)
- Product Codes: 6545GC
- Other Numbers: NFP
Function And Application
This wiring harness provides the necessary electrical connections between the passenger seat and the vehicle wiring loom. Depending on vehicle equipment, it routes signals for seat adjustment switches, occupancy/weight sensors, seatbelt buckle sensors and airbag circuits, as well as power for heated seats or motorized mechanisms. The harness is designed for the factory seat mounting points and connector interfaces used on the Peugeot 207 first series.
Installation Recommendations
- Always disconnect the battery before starting work and follow manufacturer’s procedures to avoid damage to safety systems.
- Remove the passenger seat trim and unbolt the seat from its rails to gain access to the harness connectors.
- Carefully disconnect all seat connectors, noting their positions. Label connectors if necessary to ensure correct reassembly.
- Route the replacement harness along the same path as the original, securing it with the original clips and fasteners to prevent chafing on the seat rails.
- Reconnect all connectors, verify secure engagement, and re-fit the seat. Reconnect the battery and perform any required system checks (airbag indicator, seatbelt sensor, seat adjustment operation).
- If the vehicle has airbag or restraint connectors, handle with caution and use appropriate tools and procedures.
Most Common Failure Causes
- Mechanical Wear From Seat Movement: Continuous sliding and reclining can fatigue wires at flex points, causing breaks or intermittent faults.
- Corrosion And Moisture Ingress: Water or condensation reaching connectors leads to poor contact and increased resistance.
- Damage From Previous Repairs Or Accidents: Incorrect routing or sharp bends introduced during repairs can pinch or chafe the harness.
- Connector Fatigue And Broken Pins: Repeated disconnects or poor mating can deform pins and sockets, causing unreliable signals.
- Rodent Damage: In some cases, rodents chew wiring, producing complete circuit failures.
Replacement Frequency
There Is No Fixed Interval For Replacement. The Harness Should Be Replaced When It Shows Visible Damage, Intermittent Electrical Faults, Or When Safety Circuits (Airbag/Seatbelt Sensor) Fail. Inspection During Seat Repairs Or After Water Ingress Is Recommended.
Fitment And Compatibility Notes
Designed Specifically For Peugeot 207 First Series Seats. Confirm Visual Match With Existing Harness And Connector Layout Before Installation. Searching By Product Code 6545GC Is The Fastest Way To Find This Part.
