Right Front Window Motor Peugeot 307 9649911280 9222S5

48.00

Stellantis Citroën Peugeot
9649911280 9681587380
9222CG 9222S5
!!!!! Does Not Fit Cabriolet CC Model !!!!!

1 in stock

SKU: 4478-L5_K18a M4478 Categories: , , ,

Description

Right front window lift motor for PEUGEOT 307 from 2005. Folding mirror for the vehicle, passenger side. !!!!! Does not fit CC convertible model !!!!!

High-quality replacement power window motor designed for the right front door of Peugeot 307 models from 2005. This motor is a direct-fit unit that drives the window regulator to raise and lower the passenger-side front window. Commonly searched by OEM and aftermarket part numbers, it is ideal for mechanics and DIY enthusiasts who need a reliable and easy-to-install solution to restore proper window function.

Technical Information

  • Manufacturer: Stellantis / Peugeot
  • Model: Peugeot 307 (front right window motor) – from 2005; Not compatible With CC Convertible
  • Product Codes: 9649911280, 9681587380
  • Other Numbers: 9222CG, 9222S5

Function

The motor converts electrical energy into rotational force to operate the window regulator mechanism. When the window switch is pressed, the motor turns gearing that moves the regulator arms or cable to raise or lower the glass. Proper operation requires a secure electrical connection and a regulator mechanism in good condition.

How It Is Replaced

Replacing the front right window motor is a routine repair for experienced mechanics and capable DIYers. Typical replacement steps:

  1. Disconnect the negative battery terminal to avoid short circuits and accidental operation.
  2. Remove the door trim panel and detach any clips and screws while protecting plastic fasteners.
  3. Peel back the moisture barrier carefully to access the regulator and motor assembly.
  4. Disconnect the motor electrical connector and detach any linked cables or clips.
  5. Unbolt the motor from the regulator or door shell and remove it along with any attached gears if applicable.
  6. Install the new motor, secure bolts to manufacturer torque where available, reconnect the electrical connector and reassemble the door in reverse order.
  7. Reconnect the battery and test the window operation through full travel. Check for smooth movement and correct alignment.

Installation Recommendations

  • Always Disconnect The Battery Before Starting Work To Prevent Short Circuits And Damage.
  • Handle The Door Trim And Moisture Barrier Carefully To Avoid Tearing; Replace Adhesive Seals If Damaged.
  • Lubricate Regulator Tracks And Guide Channels With Appropriate Grease To Ensure Smooth Operation And Reduce Wear.
  • Inspect The Window Regulator And Fixings During Replacement; Replace The Regulator If Heavily Worn Or Bent.
  • After Installation, Cycle The Window Several Times To Verify Smooth Travel And Confirm That Switches And Electrical Connections Are Secure.

Reason For Most Common Failures

Window motors fail primarily due to mechanical wear and environmental factors. Typical causes include:

  • Wear Of Brushes And Commutator In The Motor Leading To Reduced Torque Or Intermittent Operation.
  • Water Ingress Or Corrosion Of Electrical Connectors Causing Poor Contact Or Short Circuits.
  • Damaged Or Jammed Regulator Mechanism Putting Excess Load On The Motor.
  • Broken Gears Or Cable Failure Within The Regulator Assembly.
  • Accumulated Dirt And Lack Of Lubrication Increasing Friction And Motor Load.

Search By Part Number 9649911280 Or Reference Numbers 9681587380 / 9222CG / 9222S5 To Quickly Find The Correct Replacement For Peugeot 307 Front Right Window Applications.

Additional information

Weight 1 kg