Description
Left front door handle with key hole for CITROEN C2 and C3 PEUGEOT 307 cars
KTG color – HURRICANE GRAY PAINT
The driver’s door handle Citroën Peugeot KTGA 9101W9 is an original part intended for the left front door with a key hole. This is a used car part suitable for Citroën C2, Citroën C3 and Peugeot 307 cars. Thanks to the exact design and identical product codes, it fits into place without modification and restores the full function of opening the door from the outside.
The color of the handle is marked with the KTG code – Hurricane gray lacquer. This color variant is ideal when replacing a damaged handle when you want to preserve the original appearance of the car without the need for additional painting. A used original part usually matches the shade and quality of the material better than cheap universal replacements.
Technical information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C2, Citroën C3, Peugeot 307
Location: left front door (driver’s side), version with keyhole
Color: KTG – Hurricane gray lacquer
Product codes: 9101W9, 9101AC, KTGA
Other numbers: they may vary according to the specific production plate, but the basic identification takes place according to the codes 9101W9, 9101AC and the KTG color marking
The use of product numbers 9101W9, 9101AC and the KTGA designation greatly simplifies the search for an exact match, especially for auto mechanics and home repairers who often work by catalog numbers. Matching these codes is key to proper installation and trouble-free operation of the door handle.
Installation recommendations:
– Before disassembling the original handle, disconnect the battery, especially if you will be handling near the lock or electric central locking.
– Remove the interior door trim to gain access to the tie rods and bolts holding the handle. Be careful not to damage the plastic handles.
– Check the condition of the pull rods, plastic clips and the lock mechanism; worn or cracked parts should be replaced at the same time.
– Before installing the crank, clean the mating surfaces and check that there is no dirt or corrosion in the key hole or around the mechanism.
– Tighten the handle with the prescribed force to avoid deformation of the plastic or loosening during use.
– After installation, test opening the door several times from the outside and the inside, including locking and unlocking with the key, before finally closing the door trim.
