Description
Electric motor for the right front passenger window regulator for Citroën C5 second generation from 2005 to 2007. Control electronics for the wing mirror with electric folding function for the vehicle.
Overview
This replacement electric window motor is designed for the right front passenger door of the Citroën C5 II (2005–2007). It drives the window regulator to raise and lower the glass and includes the control electronics related to the electric folding function of the exterior mirror. The item fits professionals and competent DIY mechanics who need a direct-fit unit identified by OE numbers 9649304480 and 9222AJ.
Key Benefits
- Direct Replacement: Matches OE mounting points and electrical connector layout for straightforward fitment.
- Reliable Operation: Restores smooth up/down window movement and mirror folding functionality when original unit fails.
- Time-Saving: Spare part number referencing (9649304480 / 9222AJ) helps quickly locate the correct unit in parts catalogues.
How It Works And Typical Faults
The motor converts electrical energy into mechanical rotation that drives the window regulator mechanism; integrated electronics control mirror folding commands. Common failure modes are worn brushes or armature within the motor, seized regulator bearings or cables, corrosion on electrical contacts, and water ingress behind the door panel. Symptoms include slow or intermittent window movement, grinding noises, stuck window, or loss of mirror folding function.
Replacement Guide
Basic replacement steps (for experienced technicians or competent DIYers):
- Disconnect Battery: Always disconnect the negative battery terminal before starting to prevent short circuits and protect vehicle electronics.
- Remove Door Trim: Carefully remove the door card and any retaining clips, then peel back the moisture barrier to access the regulator area.
- Lower Window Glass: Position the glass to access the regulator mounting points and secure the glass if necessary.
- Unplug Connectors: Disconnect the electrical connector to the motor/electronics and any mirror folding wiring if integrated.
- Unscrew Motor/Regulator: Remove the bolts fixing the motor and regulator assembly, detach the regulator from the glass, and extract the unit from the door cavity.
- Install New Unit: Fit the new motor/regulator, fasten bolts to the specified torque, reconnect electrical plugs and the moisture barrier, then reassemble the door trim.
- Function Test: Reconnect the battery and test window travel and mirror folding operation before final assembly.
Installation Recommendations
- Use Proper Tools: Torx and panel trim tools prevent damage to clips and trim. Follow Citroën torque specifications where available.
- Check Wiring And Connectors: Inspect for corrosion or damaged insulation and repair as necessary to avoid repeated failures.
- Lubricate Moving Parts: Apply suitable regulator grease to sliding channels and pivot points to extend service life.
- Test Before Final Reassembly: Verify full function of window and mirror folding to avoid repeat disassembly.
Most Common Causes Of Failure
- Mechanical Wear: Brushes, armature, and bearings degrade over time, reducing motor torque and causing noise.
- Water Ingress: Moisture entering the door can corrode contacts and motor internals.
- Regulator Wear Or Jamming: Bent tracks, broken cables or seized sliders place extra load on the motor leading to premature failure.
- Electrical Issues: Poor ground or corroded connectors increase resistance and overheat the motor.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Citroën C5 Second Generation (C5 II), 2005–2007
- Product Codes: 9649304480, 9222AJ
- Other Numbers: NFP
Notes
Designed For Use By Automechanics And Experienced DIY Enthusiasts. Ensure Safe Working Practice And Follow Manufacturer Procedures When Removing And Installing Door Components.
